China Mining off-Road Truck Transmission Seal O Ring 4190704085/6V-6228fast Gearbox supplier

Solution Description

WHO WE ARE
  HangZhou GEM Vehicle Elements CO LTD is licensed  distributor of  FAST Gear & XI”AN FC automobile transmission .which is the world’s premier production base of professional motor vehicle transmission and a entire world-course provider of substantial-good quality automotive driveline system 

Our items:
  Now we are primarily source transmission and spare areas for China model vans .
  Handbook gear box : 7DS24 SHAFTAS-PLANET  4 two 8E-8306 DISC-THRUST  eight three 416-7051 Gear-RING  1 4 377-7232 PLATE-CLUTCH  2 five 264-4805 PLATE-CLUTCH  12 six 222-5203 DISC-FRICTION  eighteen seven 269-6932 BEARING-THRUST  2 eight 340-9915 SPRING  4 nine 284-6013 PIN  four 10 283-6363 PLATE-CLUTCH  4 11 284-6012 PIN  8 twelve 340-9914 SPRING  8 13 384-8632 Equipment-RING  1 14 266-3671-one RING-SEAL(INT) two 15 341-2132 PISTON  2 sixteen 266-3670-one RING-SEAL(EXT) two seventeen 6V-6228 SEAL-O-RINGO  2 18 7L-9061 SEAL-O-RINGO  three 19 Q150B1250TF2 BOLT-HEXHEAD  one twenty 5P-8245 WASHER-HARD  one 21 Q150B1240TF61 BOLT-HEXHEAD  one 22 9S-8002-1 PLUG-LDSTOR  1 23 393-3559 CASEAS-XMSN  one 24 140-9842 RING-LOCK  2 25 417-3707 Carrier-PLANET  1 26 6V-6764 RING-REXIHU (WEST LAKE) DIS.  one 27 265-7571 PLATE-CLUTCH  one 28 3S-2708 PIN-SPRING  14

Our strengths
  We understand deeply the severe application issue for mining vans. FC6A210/250 functions greater reliability and bearing ability, which, by cooperating with the motor successfully, gives outstanding dynamic overall performance for the mining vans below harsh problems. We assess strictly the software situation and suggest clients the greatest dynamical technique blend to meet the need for dynamic efficiency and fuel economic system. The incredibly low fault charge and minimal routine maintenance cost support consumers to recognize highest productivity and financial advantage.

When your order from us , the transmission nameplate is really critical

 

Deliver Products

 

Our Certificate of Approved Distribution

 

US $5-50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Mining off-Road Truck
Function: Speed Changing
Quality: Original
Package: Standard Export Package
Trademark: FAST GEAR & XI"AN FC
Origin: China

###

Customization:

###

Item Part No. Part Name Qty.
1 386-1404 SHAFTAS-PLANET  4
2 8E-8306 DISC-THRUST  8
3 416-7051 GEAR-RING  1
4 377-7232 PLATE-CLUTCH  2
5 264-4805 PLATE-CLUTCH  12
6 222-5203 DISC-FRICTION  18
7 269-6932 BEARING-THRUST  2
8 340-9915 SPRING  4
9 284-6013 PIN  4
10 283-6363 PLATE-CLUTCH  4
11 284-6012 PIN  8
12 340-9914 SPRING  8
13 384-8632 GEAR-RING  1
14 266-3671-1 RING-SEAL(INT) 2
15 341-2132 PISTON  2
16 266-3670-1 RING-SEAL(EXT) 2
17 6V-6228 SEAL-O-RINGO  2
18 7L-9061 SEAL-O-RINGO  3
19 Q150B1250TF2 BOLT-HEXHEAD  1
20 5P-8245 WASHER-HARD  1
21 Q150B1240TF61 BOLT-HEXHEAD  1
22 9S-8002-1 PLUG-LDSTOR  1
23 393-3559 CASEAS-XMSN  1
24 140-9842 RING-LOCK  2
25 417-3707 CARRIER-PLANET  1
26 6V-6764 RING-RETAINING  1
27 265-7028 PLATE-CLUTCH  1
28 3S-2708 PIN-SPRING  14
US $5-50
/ Piece
|
1 Piece

(Min. Order)

###

Application: Mining off-Road Truck
Function: Speed Changing
Quality: Original
Package: Standard Export Package
Trademark: FAST GEAR & XI"AN FC
Origin: China

###

Customization:

###

Item Part No. Part Name Qty.
1 386-1404 SHAFTAS-PLANET  4
2 8E-8306 DISC-THRUST  8
3 416-7051 GEAR-RING  1
4 377-7232 PLATE-CLUTCH  2
5 264-4805 PLATE-CLUTCH  12
6 222-5203 DISC-FRICTION  18
7 269-6932 BEARING-THRUST  2
8 340-9915 SPRING  4
9 284-6013 PIN  4
10 283-6363 PLATE-CLUTCH  4
11 284-6012 PIN  8
12 340-9914 SPRING  8
13 384-8632 GEAR-RING  1
14 266-3671-1 RING-SEAL(INT) 2
15 341-2132 PISTON  2
16 266-3670-1 RING-SEAL(EXT) 2
17 6V-6228 SEAL-O-RINGO  2
18 7L-9061 SEAL-O-RINGO  3
19 Q150B1250TF2 BOLT-HEXHEAD  1
20 5P-8245 WASHER-HARD  1
21 Q150B1240TF61 BOLT-HEXHEAD  1
22 9S-8002-1 PLUG-LDSTOR  1
23 393-3559 CASEAS-XMSN  1
24 140-9842 RING-LOCK  2
25 417-3707 CARRIER-PLANET  1
26 6V-6764 RING-RETAINING  1
27 265-7028 PLATE-CLUTCH  1
28 3S-2708 PIN-SPRING  14

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Mining off-Road Truck Transmission Seal O Ring 4190704085/6V-6228fast Gearbox     supplier China Mining off-Road Truck Transmission Seal O Ring 4190704085/6V-6228fast Gearbox     supplier
editor by czh 2023-01-27

Recent Posts

gear-motors

As one of leading gear-motors manufacturers, suppliers and exporters of mechanical products, We offer gear-motors and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.