Product Description
Product Description
Three-Phase Motor is an electric motor driven by a three-phase AC power source.
They are widely used as power sources for industrial equipment and machinery. Also called three-phase induction motors (induction motors), they are generally powered by a three-phase AC power supply of 200 V, 110V, 380V and so on.
Three-Phase Motors consist of a stator, rotor, output shaft, flange bracket, and ball bearings.
YS (MS), YE3, Y4 Motor Series
YS (MS), YE3, YE4 series three-phase asynchronous motors with Aluminum housing adopted the newest design and high quality material.lt is conformity with the IEC 34-1 standards. The efficiency of the motors can meet EFF2 and EFF1 if requested. That good features: perfect performance low noises light vibration, reliable running, good appearance, small volume and light weight.
YEJ Brake Motor Series
Brake motor is made of 2 parts: three-phase asynchronous motors and brake, it belongs to three-phase-asynchronous motor derived series. Manual brake release and bolt release are 2 forms of brake. Brake is the main components of the brake motor. Its working power divided into 2 categories: One is AC braking, the other is DC braking. Our company produces brake motors are DC brake motors, the advantage of the braking torque is below, easy installation, braking response speed, high reliability, versatility and other advantages.
To the Ac power to the brake coil is provided with suction cups for low voltage winding rated DC voltage. A single-phase AC power is rectified then supply to a sucker winding to make it work so the brake motor terminal box fitted with a rectifier, wiring diagram below.Brake motor braking time (t) is the time from the motor and brake stopping the power to the shaft completely stopped, under normal circumstances, for 63 to 880 frame size motor, the braking time is 0.5 seconds. For o-132 frame size motor the braking time is 1 second, For 160 to180 frame size motor, the braking time is 2 seconds.
YVP Frequency Conversion Motor Series
YVP speed has become the popular way, can be widely used in various industries continuously variable transmission.
In the variable frequency motor speed control system, using power electronic inverter as a power supply is inevitable that there will be high harmonics, harmonic greater impact on the motor. Mainly reflected in the magnetic circuit and the circuit harmonic magnetic potential harmonic currents. Different amplitudes and frequencies of harmonic currents and magnetic flux will cause the motor stator copper loss rotor aluminum consumption. These losses of the motor efficiency and power factor reduction, the majority of these losses into heat, causing additional heating of the motor, causing the motor temperature increases, the increase in temperature generally 10~20%. As a result of electromagnetic interference power, conduction and radiation, the stator winding insulation aging, resulting in deterioration of the common-mode voltage and leakage current of accelerated beaning, bearing perishable, while the motor screaming. Since harmonic electromagnetic torque constant harmonic electromagnetic torque and vibration harmonic MMFs and rear rotor harmonic current synthesis. The torque of the motor torque will generate pulsating issued, so that the motor speed vibration is low.
Our produce YS, IE2, IE3, IE4 Series Universal three-phase asynchronous motor design, our main consideration is the motor overload, starting performance, efficiency and power factor. Another major consideration for non-sinusoidal motor power adaptability. Suppose the influence of higher harmonic current to the motor. Since the motor is increased when the working
Temperature of the low-frequency region, class F insulation dl ass above, the use of polymer insulation materials and vacuum pressure impregnation process, and the use of special insulation structure. Ln order to reduce the electromagnetic torque ripple, improve the precision mechanical parts to improve the quality level constant. high-precision bearing mute. n order to eliminate vibration motor, the motor structure to strengthen the overall design.
Operating conditions:
Ambient temperature: | -15ºC<0<40ºC | Duty: | S1 (continuous) |
Altitude: | not exceed1000m | Insulation class: | B/F/H |
Rated voltage: | 380V, 220V-760Vis available | Protection class: | lP54/IP55 |
Rated frequency: | 50HZ/60HZ | Cooling method: | IC0141 |
Production Flow
Product Overall & Installation Dimensions:
YS/MS Series:
Frame size | lnstallation Dimensions B3 (mm ) | lnstallation Dimensions B5 (mm ) | lnstallation Dimension B14 (mm ) | Mounting Dimensions (mm ) | ||||||||||||||||||||
A | B | C | D | E | F | G | H | K | M | N | P | S | T | M | N | P | S | T | AB | AC | AD | HD | L | |
56 | 90 | 71 | 36 | 9 | 20 | 3 | 7.2 | 56 | 5.8 | 100 | 80 | 120 | 7 | 3 | 65 | 50 | 80 | M5 | 2.5 | 110 | 120 | 100 | 155 | 195 |
63 | 100 | 80 | 40 | 11 | 23 | 4 | 8.5 | 63 | 7 | 115 | 95 | 140 | 10 | 3 | 75 | 60 | 90 | M5 | 2.5 | 125 | 130 | 100 | 165 | 215 |
71 | 112 | 90 | 45 | 14 | 30 | 5 | 11 | 71 | 7 | 130 | 110 | 160 | 10 | 3.5 | 85 | 70 | 105 | M6 | 2.5 | 140 | 150 | 110 | 185 | 246 |
80 | 125 | 100 | 50 | 19 | 40 | 6 | 15.5 | 80 | 10 | 165 | 130 | 200 | 12 | 3.5 | 100 | 80 | 120 | M6 | 3 | 160 | 170 | 135 | 215 | 285 |
90S | 140 | 100 | 56 | 24 | 50 | 8 | 20 | 90 | 10 | 165 | 130 | 200 | 12 | 3.5 | 115 | 95 | 140 | M8 | 3 | 178 | 185 | 137 | 226 | 335 |
90L | 140 | 125 | 56 | 24 | 50 | 8 | 20 | 90 | 10 | 165 | 130 | 200 | 12 | 3.5 | 115 | 95 | 140 | M8 | 3 | 178 | 185 | 137 | 226 | 335 |
100L | 160 | 140 | 63 | 28 | 60 | 8 | 24 | 100 | 12 | 215 | 180 | 250 | 15 | 4 | 130 | 110 | 160 | M8 | 3.5 | 206 | 206 | 150 | 250 | 376 |
112M | 190 | 140 | 70 | 28 | 60 | 8 | 24 | 112 | 12 | 215 | 180 | 250 | 15 | 4 | 130 | 110 | 160 | M8 | 3.5 | 222 | 228 | 170 | 285 | 400 |
132S | 216 | 140 | 89 | 38 | 80 | 10 | 33 | 132 | 12 | 265 | 230 | 300 | 15 | 4 | 165 | 130 | 200 | M10 | 4 | 257 | 267 | 190 | 325 | 460 |
132M | 216 | 178 | 89 | 38 | 80 | 10 | 33 | 132 | 12 | 265 | 230 | 300 | 15 | 4 | 165 | 130 | 200 | M10 | 4 | 257 | 267 | 190 | 325 | 500 |
160M | 254 | 210 | 108 | 42 | 110 | 12 | 37 | 160 | 15 | 300 | 250 | 350 | 15 | 5 | 215 | 180 | 250 | M12 | 4 | 320 | 330 | 255 | 420 | 615 |
160L | 254 | 254 | 108 | 42 | 110 | 12 | 37 | 160 | 15 | 300 | 250 | 350 | 15 | 5 | 215 | 180 | 250 | M12 | 4 | 320 | 330 | 255 | 420 | 675 |
180M | 279 | 241 | 121 | 48 | 110 | 14 | 42.5 | 180 | 15 | 300 | 250 | 350 | 19 | 5 | 265 | 230 | 300 | M15 | 4 | 355 | 380 | 280 | 455 | 700 |
180L | 279 | 279 | 121 | 48 | 110 | 14 | 42.5 | 180 | 15 | 300 | 250 | 350 | 19 | 5 | 265 | 230 | 300 | M15 | 4 | 355 | 380 | 280 | 455 | 740 |
YE3, YE4 Series:
Frame size | lnstallation Dimensions B3 (mm ) | lnstallation Dimensions B5 (mm ) | lnstallation Dimension B14 (mm ) | Mounting Dimensions (mm ) | ||||||||||||||||||||
A | B | C | D | E | F | G | H | K | M | N | P | S | T | M | N | P | S | T | AB | AC | AD | HD | L | |
56 | 90 | 71 | 36 | 9 | 20 | 3 | 7.2 | 56 | 5.8 | 100 | 80 | 120 | 7 | 3 | 65 | 50 | 80 | M5 | 2.5 | 110 | 120 | 100 | 155 | 195 |
63 | 100 | 80 | 40 | 11 | 23 | 4 | 8.5 | 63 | 7 | 115 | 95 | 140 | 10 | 3 | 75 | 60 | 90 | M5 | 2.5 | 125 | 130 | 100 | 165 | 215 |
71 | 112 | 90 | 45 | 14 | 30 | 5 | 11 | 71 | 7 | 130 | 110 | 160 | 10 | 3.5 | 85 | 70 | 105 | M6 | 2.5 | 140 | 150 | 110 | 185 | 246 |
80 | 125 | 100 | 50 | 19 | 40 | 6 | 15.5 | 80 | 10 | 165 | 130 | 200 | 12 | 3.5 | 100 | 80 | 120 | M6 | 3 | 160 | 170 | 145 | 215 | 305 |
90S | 140 | 100 | 56 | 24 | 50 | 8 | 20 | 90 | 10 | 165 | 130 | 200 | 12 | 3.5 | 115 | 95 | 140 | M8 | 3 | 178 | 185 | 165 | 226 | 360 |
90L | 140 | 125 | 56 | 24 | 50 | 8 | 20 | 90 | 10 | 165 | 130 | 200 | 12 | 3.5 | 115 | 95 | 140 | M8 | 3 | 178 | 185 | 165 | 226 | 385 |
100L | 160 | 140 | 63 | 28 | 60 | 8 | 24 | 100 | 12 | 215 | 180 | 250 | 15 | 4 | 130 | 110 | 160 | M8 | 3.5 | 270 | 206 | 175 | 250 | 445 |
112M | 190 | 140 | 70 | 28 | 60 | 8 | 24 | 112 | 12 | 215 | 180 | 250 | 15 | 4 | 130 | 110 | 160 | M8 | 3.5 | 270 | 228 | 190 | 285 | 455 |
132S | 216 | 140 | 89 | 38 | 80 | 10 | 33 | 132 | 12 | 265 | 230 | 300 | 15 | 4 | 165 | 130 | 200 | M10 | 4 | 270 | 267 | 220 | 325 | 475 |
132M | 216 | 178 | 89 | 38 | 80 | 10 | 33 | 132 | 12 | 265 | 230 | 300 | 15 | 4 | 165 | 130 | 200 | M10 | 4 | 270 | 267 | 220 | 325 | 570 |
160M | 254 | 210 | 108 | 42 | 110 | 12 | 37 | 160 | 15 | 300 | 250 | 350 | 15 | 5 | 215 | 180 | 250 | M12 | 4 | 320 | 330 | 260 | 420 | 655 |
160L | 254 | 254 | 108 | 42 | 110 | 12 | 37 | 160 | 15 | 300 | 250 | 350 | 15 | 5 | 215 | 180 | 250 | M12 | 4 | 320 | 330 | 260 | 420 | 685 |
180M | 279 | 241 | 121 | 48 | 110 | 14 | 42.5 | 180 | 15 | 300 | 250 | 350 | 19 | 5 | 265 | 230 | 300 | M15 | 4 | 360 | 380 | 305 | 455 | 705 |
180L | 279 | 279 | 121 | 48 | 110 | 14 | 42.5 | 180 | 15 | 300 | 250 | 350 | 19 | 5 | 265 | 230 | 300 | M15 | 4 | 360 | 380 | 305 | 455 | 745 |
YEJ B3 Series H63-180:
Frame size | Installation Dimensions (mm) | ||||||||||||
A | B | C | D | E | F | G | H | K | AB | AC | HD | L | |
63 | 100 | 80 | 40 | Φ11 | 23 | 4 | 12.5 | 63 | Φ7 | 135 | 120×120 | 167 | 255 |
71 | 112 | 90 | 45 | Φ14 | 30 | 5 | 16 | 71 | Φ7 | 137 | 130×130 | 178 | 305 |
80M | 125 | 100 | 50 | Φ19 | 40 | 6 | 21.5 | 80 | Φ10 | 155 | 145×145 | 190 | 340 |
90S | 140 | 100 | 56 | Φ24 | 50 | 8 | 27 | 90 | Φ10 | 175 | 160×160 | 205 | 400 |
90L | 140 | 125 | 56 | Φ24 | 50 | 8 | 27 | 90 | Φ10 | 175 | 160×160 | 205 | 400 |
100L | 160 | 140 | 63 | Φ28 | 60 | 8 | 31 | 100 | Φ12 | 200 | 185×185 | 240 | 440 |
112M | 190 | 140 | 70 | Φ28 | 60 | 8 | 31 | 112 | Φ12 | 230 | 200×200 | 270 | 480 |
132S | 216 | 140 | 89 | Φ38 | 80 | 10 | 41 | 132 | Φ12 | 270 | 245×245 | 315 | 567 |
132M | 216 | 178 | 89 | Φ38 | 80 | 10 | 41 | 132 | Φ12 | 270 | 245×245 | 315 | 567 |
160M | 254 | 210 | 108 | Φ42 | 110 | 12 | 45 | 160 | Φ14.5 | 320 | 335×335 | 450 | 780 |
160L | 254 | 254 | 108 | Φ42 | 110 | 12 | 45 | 160 | Φ14.5 | 320 | 335×335 | 450 | 780 |
180M | 279 | 241 | 121 | Φ48 | 110 | 14 | 51.5 | 180 | Φ14.5 | 355 | 370×370 | 500 | 880 |
180L | 279 | 279 | 121 | Φ48 | 110 | 14 | 51.5 | 180 | Φ14.5 | 355 | 370×370 | 500 | 880 |
YEJ B5 Series H63-180:
Frame size | Installation Dimensions (mm) | |||||||||||
D | E | F | G | M | N | P | S | T | AC | HD | L | |
63 | Φ11 | 23 | 4 | 12.5 | 115 | 95 | 140 | 10 | 3 | 120×120 | 104 | 255 |
71 | Φ14 | 30 | 5 | 16 | 130 | 110 | 160 | 10 | 3 | 130×130 | 107 | 305 |
80M | Φ19 | 40 | 6 | 21.5 | 165 | 130 | 200 | 12 | 3.5 | 145×145 | 115 | 340 |
90S | Φ24 | 50 | 8 | 27 | 165 | 130 | 200 | 12 | 3.5 | 160×160 | 122 | 400 |
90L | Φ24 | 50 | 8 | 27 | 165 | 130 | 200 | 12 | 3.5 | 160×160 | 122 | 400 |
100L | Φ28 | 60 | 8 | 31 | 215 | 180 | 250 | 14.5 | 4 | 185×185 | 137 | 440 |
112M | Φ28 | 60 | 8 | 31 | 215 | 180 | 250 | 14.5 | 4 | 200×200 | 155 | 480 |
132S | Φ38 | 80 | 10 | 41 | 265 | 230 | 300 | 14.5 | 4 | 245×245 | 180 | 567 |
132M | Φ38 | 80 | 10 | 41 | 265 | 230 | 300 | 14.5 | 4 | 245×245 | 180 | 567 |
160M | Φ42 | 110 | 12 | 45 | 300 | 250 | 350 | 18.5 | 5 | 320×320 | 290 | 780 |
160L | Φ42 | 110 | 12 | 45 | 300 | 250 | 350 | 18.5 | 5 | 320×320 | 290 | 780 |
180M | Φ48 | 110 | 14 | 51.5 | 300 | 250 | 350 | 18.5 | 5 | 360×360 | 340 | 880 |
180L | Φ48 | 110 | 14 | 51.5 | 300 | 250 | 350 | 18.5 | 5 | 360×360 | 340 | 880 |
YEJ B14 Series H63-112:
Frame size | Installation Dimensions (mm) | |||||||||||
D | E | F | G | M | N | P | S | T | AC | HD | L | |
63 | Φ11 | 23 | 4 | 12.5 | 75 | 60 | 90 | M5 | 2.5 | 120×120 | 104 | 255 |
71 | Φ14 | 30 | 5 | 16 | 85 | 70 | 105 | M6 | 2.5 | 130×130 | 107 | 305 |
80 | Φ19 | 40 | 6 | 21.5 | 100 | 80 | 110 | M6 | 3 | 145×145 | 115 | 340 |
90S | Φ24 | 50 | 8 | 27 | 115 | 95 | 120 | M8 | 3 | 160×160 | 122 | 400 |
90L | Φ24 | 50 | 8 | 27 | 115 | 95 | 120 | M8 | 3 | 160×160 | 122 | 400 |
100L | Φ28 | 60 | 8 | 31 | 130 | 110 | 155 | M8 | 3.5 | 185×185 | 137 | 440 |
112M | Φ28 | 60 | 8 | 31 | 130 | 110 | 160 | M8 | 3.5 | 200×200 | 155 | 480 |
YVP B3 Series H63-180:
Frame size | Installation Dimensions (mm) | ||||||||||||
A | B | C | D | E | F | G | H | K | AB | AC | HD | L | |
63 | 100 | 80 | 40 | Φ11 | 23 | 4 | 12.5 | 63 | 7 | 135 | 120×120 | 167 | 260 |
71 | 112 | 90 | 45 | Φ14 | 30 | 5 | 16 | 71 | 7 | 137 | 130×130 | 178 | 295 |
80 | 125 | 100 | 50 | Φ19 | 40 | 6 | 21.5 | 80 | 10 | 155 | 145×145 | 190 | 340 |
90S | 140 | 100 | 56 | Φ24 | 50 | 8 | 27 | 90 | 10 | 175 | 160×160 | 205 | 390 |
90L | 140 | 125 | 56 | Φ24 | 50 | 8 | 27 | 90 | 10 | 175 | 160×160 | 205 | 400 |
100L | 160 | 140 | 63 | Φ28 | 60 | 8 | 31 | 100 | 12 | 200 | 185×185 | 240 | 430 |
112M | 190 | 140 | 70 | Φ28 | 60 | 8 | 31 | 112 | 12 | 230 | 200×200 | 270 | 460 |
132S | 216 | 140 | 89 | Φ38 | 80 | 10 | 41 | 132 | 12 | 270 | 245×245 | 315 | 525 |
132M | 216 | 178 | 89 | Φ38 | 80 | 10 | 41 | 132 | 12 | 270 | 245×245 | 315 | 525 |
160M | 254 | 210 | 108 | Φ42 | 110 | 12 | 45 | 160 | 14.5 | 320 | 335×335 | 450 | 850 |
160L | 254 | 254 | 108 | Φ42 | 110 | 12 | 45 | 160 | 14.5 | 320 | 335×335 | 450 | 870 |
180M | 279 | 241 | 121 | Φ48 | 110 | 14 | 51.5 | 180 | 14.5 | 355 | 370×370 | 500 | 880 |
180L | 279 | 279 | 121 | Φ48 | 110 | 14 | 51.5 | 180 | 14.5 | 355 | 370×370 | 500 | 980 |
YVP B5 Series H63-180:
C | Installation Dimensions (mm) | |||||||||||
D | E | F | G | M | N | P | S | T | AC | HD | L | |
63 | Φ11 | 23 | 4 | 12.5 | 115 | 95 | 140 | 10 | 3 | 120×120 | 104 | 260 |
71 | Φ14 | 30 | 5 | 16 | 130 | 110 | 160 | 10 | 3.5 | 130×130 | 107 | 295 |
80M | Φ19 | 40 | 6 | 21.5 | 165 | 130 | 200 | 12 | 3.5 | 145×145 | 115 | 340 |
90S | Φ24 | 50 | 8 | 27 | 165 | 130 | 200 | 12 | 3.5 | 160×160 | 122 | 390 |
90L | Φ24 | 50 | 8 | 27 | 165 | 130 | 200 | 12 | 3.5 | 160×160 | 122 | 400 |
100L | Φ28 | 60 | 8 | 31 | 215 | 180 | 250 | 14.5 | 4 | 185×185 | 137 | 430 |
112M | Φ28 | 60 | 8 | 31 | 215 | 180 | 250 | 14.5 | 4 | 200×200 | 155 | 460 |
132S | Φ38 | 80 | 10 | 41 | 265 | 230 | 300 | 14.5 | 4 | 245×245 | 180 | 525 |
132M | Φ38 | 80 | 10 | 41 | 265 | 230 | 300 | 14.5 | 4 | 245×245 | 180 | 252 |
160M | Φ42 | 110 | 12 | 45 | 300 | 250 | 350 | 18.5 | 5 | 335×335 | 290 | 850 |
160L | Φ42 | 110 | 12 | 45 | 300 | 250 | 350 | 18.5 | 5 | 335×335 | 290 | 870 |
180M | Φ48 | 110 | 14 | 51.5 | 300 | 250 | 350 | 18.5 | 5 | 370×370 | 340 | 880 |
180L | Φ48 | 110 | 14 | 51.5 | 300 | 250 | 350 | 18.4 | 5 | 370×370 | 340 | 980 |
YVP B14 Series H63-112:
Frame size | Installation Dimensions (mm) | |||||||||||
D | E | F | G | M | N | P | S | T | AC | HD | L | |
63 | Φ11 | 23 | 4 | 12.5 | 75 | 60 | 90 | M5 | 2.5 | 120×120 | 104 | 260 |
71 | Φ14 | 30 | 5 | 16 | 85 | 70 | 105 | M6 | 2.5 | 130×130 | 107 | 295 |
80 | Φ19 | 40 | 6 | 21.5 | 100 | 80 | 110 | M6 | 3 | 145×145 | 115 | 340 |
90S | Φ24 | 50 | 8 | 27 | 115 | 95 | 120 | M8 | 3 | 160×160 | 122 | 390 |
90L | Φ24 | 50 | 8 | 27 | 115 | 95 | 120 | M8 | 3 | 160×160 | 122 | 400 |
100L | Φ28 | 60 | 8 | 31 | 130 | 110 | 155 | M8 | 3.5 | 185×185 | 137 | 430 |
112M | Φ28 | 60 | 8 | 31 | 130 | 110 | 160 | M8 | 3.5 | 200×200 | 155 | 460 |
Product Parameters
YS/MS Series:
TYPE | RATED OUTPUT | RATED SPEED |
EFFICIENCY | POWER FOCTOR |
RATED CURRENT |
RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TOROUE | LOCKED ROTOR TORQUE | |
RATED TORQUE | RATED TORQUE | RATED CURRENT | ||||||||
KW | HP | rpm | η%(IE2) | cosφ | A | Nm | Ts/Tn | Tmax/Tn | IS/In | |
YS-5612 | 0.09 | 1/8 | 2680 | 62.0 | 0.68 | 0.32 | 0.307 | 2.3 | 2.3 | 6.0 |
YS-5622 | 0.12 | 1/6 | 2660 | 67.0 | 0.71 | 0.38 | 0.410 | 2.3 | 2.3 | 6.0 |
YS-6312 | 0.18 | 1/4 | 2710 | 69.0 | 0.75 | 0.53 | 0.614 | 2.3 | 2.3 | 6.0 |
YS-6322 | 0.25 | 1/3 | 2730 | 72.0 | 0.78 | 0.68 | 0.853 | 2.3 | 2.3 | 6.0 |
YS-7112 | 0.37 | 1/2 | 2760 | 73.5 | 0.80 | 0.96 | 1.260 | 2.3 | 2.3 | 6.0 |
YS-7122 | 0.55 | 3/4 | 2770 | 75.5 | 0.82 | 1.35 | 1.880 | 2.3 | 2.3 | 6.0 |
YS-8012 | 0.75 | 1.0 | 2770 | 76.5 | 0.85 | 1.75 | 2.560 | 2.2 | 2.3 | 6.0 |
YS-8571 | 1.10 | 1.5 | 2800 | 77.0 | 0.85 | 2.55 | 3.750 | 2.2 | 2.3 | 7.0 |
YS-90S-2 | 1.50 | 2.0 | 2840 | 78.5 | 0.85 | 3.42 | 5.040 | 2.2 | 2.3 | 7.0 |
YS-90L-2 | 2.20 | 3.0 | 2840 | 81.0 | 0.86 | 4.80 | 7.400 | 2.2 | 2.3 | 7.0 |
YS-100L-2 | 3.00 | 4.0 | 2890 | 84.6 | 0.87 | 6.17 | 9.910 | 2.2 | 2.3 | 7.8 |
YS-5614 | 0.06 | 1/12 | 1320 | 56.0 | 0.58 | 0.28 | 0.410 | 2.4 | 2.4 | 6.0 |
YS-5624 | 0.09 | 1/8 | 1320 | 58.0 | 0.61 | 0.39 | 0.614 | 2.4 | 2.4 | 6.0 |
YS-6314 | 0.12 | 1/6 | 1350 | 60.0 | 0.63 | 0.48 | 0.819 | 2.4 | 2.4 | 6.0 |
YS-6324 | 0.18 | 1/4 | 1350 | 64.0 | 0.66 | 0.65 | 1.230 | 2.4 | 2.4 | 6.0 |
YS-7114 | 0.25 | 1/3 | 1350 | 67.0 | 0.68 | 0.83 | 1.710 | 2.4 | 2.4 | 6.0 |
YS-7124 | 0.37 | 1/2 | 1350 | 69.5 | 0.72 | 1.12 | 2.520 | 2.4 | 2.4 | 6.0 |
YS-8014 | 0.55 | 3/4 | 1380 | 73.5 | 0.73 | 1.56 | 3.750 | 2.4 | 2.4 | 6.0 |
YS-8571 | 0.75 | 1.0 | 1390 | 75.5 | 0.75 | 2.01 | 5.120 | 2.3 | 2.4 | 6.5 |
YS-90S-4 | 1.10 | 1.5 | 1400 | 78.0 | 0.78 | 2.75 | 7.400 | 2.3 | 2.4 | 6.5 |
YS-90L-4 | 1.50 | 2.0 | 1400 | 79.0 | 0.79 | 3.65 | 10.100 | 2.3 | 2.4 | 6.5 |
YS-100L1-4 | 2.20 | 3.0 | 1440 | 84.3 | 0.81 | 4.90 | 14.600 | 2.3 | 2.3 | 7.6 |
YS-100L2-4 | 3.00 | 4.0 | 1440 | 85.5 | 0.82 | 6.50 | 19.900 | 2.3 | 2.3 | 7.6 |
YS-7116 | 0.18 | 1/4 | 910 | 59.0 | 0.61 | 0.76 | 1.890 | 2.0 | 2.0 | 5.5 |
YS-7126 | 0.25 | 1/3 | 910 | 63.0 | 0.62 | 0.97 | 2.260 | 2.0 | 2.0 | 5.5 |
YS-8016 | 0.37 | 1/2 | 910 | 68.0 | 0.62 | 1.33 | 3.880 | 2.0 | 2.0 | 5.5 |
YS-8026 | 0.55 | 3/4 | 910 | 71.0 | 0.64 | 1.84 | 5.770 | 2.0 | 2.0 | 5.5 |
YS-90S-6 | 0.75 | 1.0 | 920 | 73.0 | 0.68 | 2.30 | 7.790 | 2.0 | 2.1 | 5.5 |
YS-90L-6 | 1.10 | 1.5 | 920 | 74.0 | 0.70 | 3.23 | 11.400 | 2.0 | 2.1 | 6.0 |
YS-100L-6 | 1.50 | 2.0 | 940 | 79.0 | 0.75 | 3.38 | 15.200 | 2.0 | 2.1 | 6.5 |
YS-711-8 | 0.09 | 0.12 | 600 | 40.0 | 0.57 | 0.60 | 1.950 | 1.8 | 1.9 | 2.8 |
YS-712-8 | 0.12 | 0.18 | 600 | 45.0 | 0.57 | 0.71 | 2.160 | 1.8 | 1.9 | 2.8 |
YS-801-8 | 0.18 | 0.25 | 645 | 51.0 | 0.61 | 0.88 | 2.490 | 1.8 | 2.0 | 3.3 |
YS-802-8 | 0.25 | 0.37 | 645 | 54.0 | 0.61 | 1.15 | 3.640 | 1.8 | 2.0 | 3.3 |
YS-90S-8 | 0.37 | 0.50 | 670 | 62.0 | 0.61 | 1.49 | 5.120 | 1.8 | 2.0 | 4.0 |
YS-90L-8 | 0.55 | 0.75 | 670 | 63.0 | 0.61 | 2.17 | 7.610 | 1.8 | 2.1 | 4.0 |
YE3 Series:
TYPE | RATED OUTPUT | RATED SPEED |
EFFICIENCY | POWER FOCTOR |
RATED CURRENT |
RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TOROUE | LOCKED ROTOR TORQUE | |
RATED TORQUE | RATED TORQUE | RATED CURRENT | ||||||||
KW | HP | rpm | η%(IE3) | cosφ | A | Nm | Ts/Tn | Tmax/Tn | IS/In | |
YE3-801-2 | 0.75 | 1.0 | 2880 | 80.7 | 0.82 | 1.72 | 2.49 | 2.3 | 2.3 | 7.0 |
YE3-802-2 | 1.10 | 1.5 | 2880 | 82.7 | 0.83 | 2.43 | 3.65 | 2.2 | 2.3 | 7.3 |
YE3-90S-2 | 1.50 | 2.0 | 2895 | 84.2 | 0.84 | 3.22 | 4.95 | 2.2 | 2.3 | 7.6 |
YE3-90L-2 | 2.20 | 3.0 | 2895 | 85.9 | 0.85 | 4.58 | 7.26 | 2.2 | 2.3 | 7.6 |
YE3-100L-2 | 3.00 | 4.0 | 2895 | 87.1 | 0.87 | 6.02 | 9.90 | 2.2 | 2.3 | 7.8 |
YE3-160L-2 | 18.50 | 25.0 | 2940 | 92.4 | 0.89 | 34.20 | 60.10 | 2.0 | 2.3 | 8.2 |
YE3-802-4 | 0.75 | 1.0 | 1420 | 82.5 | 0.75 | 1.84 | 5.04 | 2.3 | 2.3 | 6.6 |
YE3-90s-4 | 1.10 | 1.5 | 1445 | 84.1 | 0.76 | 2.61 | 7.27 | 2.3 | 2.3 | 6.8 |
YE3-90L-4 | 1.50 | 2.0 | 1445 | 85.3 | 0.77 | 3.47 | 9.91 | 2.3 | 2.3 | 7.0 |
YE3-100L1-4 | 2.20 | 3.0 | 1435 | 86.7 | 0.81 | 4.76 | 14.60 | 2.3 | 2.3 | 7.6 |
YE3-100L2-4 | 3.00 | 4.0 | 1435 | 87.7 | 0.82 | 6.34 | 20.00 | 2.3 | 2.3 | 7.6 |
YE3-112M-4 | 4.00 | 5.5 | 1440 | 88.6 | 0.82 | 8.37 | 26.50 | 2.2 | 2.3 | 7.8 |
YE3-132S-4 | 5.50 | 7.5 | 1460 | 89.6 | 0.83 | 11.20 | 36.00 | 2.0 | 2.3 | 7.9 |
YE3-132M-4 | 7.50 | 10.0 | 1460 | 90.4 | 0.84 | 15.00 | 49.10 | 2.0 | 2.3 | 7.5 |
YE3-160M-4 | 11.00 | 15.0 | 1465 | 91.4 | 0.85 | 21.50 | 71.70 | 2.2 | 2.3 | 7.7 |
YE3-160L-4 | 15.00 | 20.0 | 1465 | 92.1 | 0.86 | 28.80 | 97.80 | 2.2 | 2.3 | 7.8 |
YE3-180M-4 | 18.50 | 25.0 | 1470 | 92.6 | 0.86 | 35.30 | 120.20 | 2.0 | 2.3 | 7.8 |
YE3-180L-4 | 22.00 | 30.0 | 1470 | 93 | 0.86 | 41.80 | 142.90 | 2.0 | 2.3 | 7.8 |
YE3-90S-6 | 0.75 | 1.0 | 935 | 78.9 | 0.71 | 2.03 | 7.66 | 2.0 | 2.1 | 6.0 |
YE3-90L-6 | 1.10 | 1.5 | 945 | 81 | 0.73 | 2.83 | 11.10 | 2.0 | 2.1 | 6.0 |
YE3-100L-6 | 1.50 | 2.0 | 949 | 82.5 | 0.73 | 3.78 | 15.10 | 2.0 | 2.1 | 6.5 |
YE3-112M-6 | 2.20 | 3.0 | 955 | 84.3 | 0.74 | 5.36 | 22.00 | 2.0 | 2.1 | 6.6 |
YE3-132S-6 | 3.00 | 4.0 | 968 | 85.6 | 0.74 | 7.20 | 29.60 | 2.0 | 2.1 | 6.8 |
YE3-132M1-6 | 4.00 | 5.5 | 968 | 86.8 | 0.74 | 9.46 | 39.50 | 2.0 | 2.1 | 6.8 |
YE3-132M2-6 | 5.50 | 7.5 | 968 | 88 | 0.75 | 12.70 | 54.30 | 2.0 | 2.1 | 7.0 |
YE3-160M-6 | 7.50 | 10.0 | 970 | 89.1 | 0.79 | 16.20 | 73.80 | 2.0 | 2.1 | 7.0 |
YE3-160L-6 | 11.00 | 15.0 | 970 | 90.3 | 0.8 | 23.10 | 108.30 | 2.0 | 2.1 | 6.2 |
YE3-180L-6 | 18.50 | 20.0 | 975 | 91.2 | 0.81 | 30.90 | 146.90 | 2.0 | 2.1 | 7.3 |
YE4 Series:
OUTPUT | RATED CURRENT | ROTATE SPEED | EFFICIENCY | POWER FOCTOR | RATED TORQUE | LOCKED ROTOR TORQUE | LOCKED ROTOR CURRENT | MAXIMUM TORQUE | NOISE | |
TYPE | RATED TORQUE | RATED CURRENT | RATED TORQUE | |||||||
kW | A | r/min | Eff.%(IE4) | P.F | N.m | Tst | Ist | Tmax | dB(A) | |
TN | IN | TN | ||||||||
SYNCHRO-SPEED 3000r/min | ||||||||||
YE4-80M1-2 | 0.75 | 1.6 | 2895 | 83.5 | 0.83 | 2.47 | 2.2 | 8.5 | 2.3 | 62 |
YE4-80M2-2 | 1.1 | 2.4 | 2895 | 85.2 | 0.83 | 3.63 | 2.2 | 8.5 | 2.3 | 62 |
YE4-90S-2 | 1.5 | 3.1 | 2880 | 86.5 | 0.85 | 4.97 | 2.2 | 9.0 | 2.3 | 67 |
YE4-90L-2 | 2.2 | 4.4 | 2880 | 88.0 | 0.86 | 7.30 | 2.2 | 9.0 | 2.3 | 67 |
YE4-100L-2 | 3 | 5.9 | 2905 | 89.1 | 0.87 | 9.86 | 2.2 | 9.5 | 2.3 | 74 |
YE4-112M-2 | 4 | 7.7 | 2920 | 90.0 | 0.88 | 13.10 | 2.2 | 9.5 | 2.3 | 77 |
YE4-132S1-2 | 5.5 | 10.4 | 2945 | 90.0 | 0.88 | 17.80 | 2.0 | 9.5 | 2.3 | 79 |
YE4-132S2-2 | 7.5 | 14 | 2940 | 91.7 | 0.89 | 24.40 | 2.0 | 9.5 | 2.3 | 79 |
YE4-160M1-2 | 11 | 20.3 | 2965 | 92.6 | 0.89 | 35.40 | 2.0 | 9.5 | 2.3 | 81 |
YE4-160M2-2 | 15 | 27.5 | 2965 | 93.3 | 0.89 | 48.30 | 2.0 | 9.5 | 2.3 | 81 |
YE4-160L-2 | 18.5 | 33.7 | 2965 | 93.7 | 0.89 | 59.60 | 2.0 | 9.5 | 2.3 | 81 |
SYNCHRO-SPEED1500r/min | ||||||||||
YE4-80M1-4 | 0.55 | 1.4 | 1440 | 83.9 | 0.74 | 3.65 | 2.4 | 6.6 | 2.3 | 56 |
YE4-80M2-4 | 0.75 | 1.8 | 1440 | 85.7 | 0.74 | 4.97 | 2.3 | 8.5 | 2.3 | 56 |
YE4-90S-4 | 1.1 | 2.6 | 1445 | 87.2 | 0.75 | 7.27 | 2.3 | 8.5 | 2.3 | 59 |
YE4-90L-4 | 1.5 | 3.4 | 1445 | 88.2 | 0.76 | 9.91 | 2.3 | 9.0 | 2.3 | 59 |
YE4-100L1-4 | 2.2 | 4.7 | 1450 | 89.5 | 0.79 | 14.50 | 2.3 | 9.0 | 2.3 | 64 |
YE4-100L2-4 | 3 | 6.3 | 1450 | 90.4 | 0.8 | 19.80 | 2.3 | 9.5 | 2.3 | 64 |
YE4-112M-4 | 4 | 8.3 | 1460 | 91.1 | 0.8 | 26.20 | 2.3 | 9.5 | 2.3 | 65 |
YE4-132S-4 | 5.5 | 11.4 | 1475 | 91.1 | 0.8 | 35.60 | 2.0 | 9.5 | 2.3 | 71 |
YE4-132M-4 | 7.5 | 15.2 | 1470 | 92.6 | 0.81 | 48.70 | 2.0 | 9.5 | 2.3 | 71 |
YE4-160M-4 | 11 | 21.6 | 1470 | 93.3 | 0.83 | 71.50 | 2.0 | 9.5 | 2.3 | 73 |
YE4-160L-4 | 15 | 28.9 | 1470 | 93.9 | 0.84 | 97.40 | 2.0 | 9.5 | 2.3 | 73 |
SYNCHRO-SPEED1000r/min | ||||||||||
YE4-80M1-6 | 0.37 | 1.1 | 940 | 78.0 | 0.68 | 3.76 | 1.9 | 6.0 | 2.1 | 54 |
YE4-80M2-6 | 0.55 | 1.5 | 940 | 80.9 | 0.68 | 5.59 | 1.9 | 6.0 | 2.1 | 54 |
YE4-90S-6 | 0.75 | 2 | 950 | 82.7 | 0.7 | 7.54 | 2.1 | 7.5 | 2.1 | 57 |
YE4-90L-6 | 1.1 | 2.8 | 950 | 84.5 | 0.7 | 11.10 | 2.1 | 7.5 | 2.1 | 57 |
YE4-100L-6 | 1.5 | 3.7 | 960 | 85.9 | 0.71 | 14.90 | 2.1 | 7.5 | 2.1 | 61 |
YE4-112M-6 | 2.2 | 5.4 | 975 | 87.4 | 0.71 | 21.50 | 2.1 | 7.5 | 2.1 | 65 |
YE4-132S-6 | 3 | 7.2 | 985 | 88.6 | 0.71 | 29.10 | 2.0 | 7.5 | 2.1 | 69 |
YE4-132M1-6 | 4 | 9.4 | 985 | 89.5 | 0.72 | 38.80 | 2.0 | 8.0 | 2.1 | 69 |
YE4-132M2-6 | 5.5 | 12.8 | 980 | 90.5 | 0.72 | 53.60 | 2.0 | 8.0 | 2.1 | 69 |
YE4-160M-6 | 7.5 | 16.4 | 980 | 91.3 | 0.76 | 73.10 | 2.0 | 8.0 | 2.1 | 73 |
YE4-160L-6 | 11 | 23.5 | 980 | 92.3 | 0.77 | 107.00 | 2.0 | 8.5 | 2.1 | 73 |
YEJ 3000r/min 380V 50Hz:
TYPE | RATED OUTPUT | RATED SPEED | EFFICENCY | POWER FOCTOR | RATED CURRENT | RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TORQUE | STATIC BRAKE TCRQUE | BRAKE TIME |
RATED TORQUE | RATED TORQUE | DC | ||||||||
KW | rpm | η% | COSφ | A | Nm | Ts/Tn | Tmax/Tn | NM | S | |
YEJ-631-2 | 0.18 | 2800 | 65.0 | 0.80 | 0.53 | 0.61 | 2.2 | 2.2 | 3.5 | 0.10 |
YEJ-632-2 | 0.25 | 2800 | 68.0 | 0.81 | 0.69 | 0.85 | 2.2 | 2.2 | 3.5 | 0.10 |
YEJ-711-2 | 0.37 | 2830 | 70.0 | 0.81 | 0.99 | 1.25 | 2.2 | 2.2 | 4.0 | 0.10 |
YEJ-712-2 | 0.55 | 2830 | 73.0 | 0.82 | 1.40 | 1.86 | 2.2 | 2.3 | 4.0 | 0.10 |
YEJ-801-2 | 0.75 | 2840 | 75.0 | 0.83 | 1.83 | 2.52 | 2.2 | 2.3 | 7.5 | 0.10 |
YEJ-802-2 | 1.10 | 2840 | 77.0 | 0.84 | 2.55 | 3.70 | 2.2 | 2.3 | 7.5 | 0.10 |
YEJ-90S-2 | 1.50 | 2840 | 79.0 | 0.84 | 3.39 | 5.04 | 2.2 | 2.3 | 15 | 0.15 |
YEJ-90L-2 | 2.20 | 2840 | 81.0 | 0.85 | 4.80 | 7.40 | 2.2 | 2.3 | 15 | 0.15 |
YEJ-100L1-2 | 3.00 | 2860 | 83.0 | 0.87 | 6.31 | 10.00 | 2.2 | 2.3 | 30 | 0.15 |
YEJ-100L2-2 | 4.00 | 2880 | 85.0 | 0.88 | 8.22 | 13.30 | 2.2 | 2.3 | 40 | 0.15 |
YEJ-112M-2 | 5.50 | 2910 | 86.0 | 0.88 | 11.2 | 18.00 | 2.2 | 2.3 | 80 | 0.15 |
YEJ-132S-2 | 7.00 | 2910 | 87.0 | 0.88 | 15.1 | 24.60 | 2.2 | 2.3 | 80 | 0.15 |
YEJ-132M-2 | 11.00 | 2930 | 88.0 | 0.89 | 21.3 | 35.90 | 2.2 | 2.3 | 150 | 0.30 |
YEJ-160M-2 | 15.00 | 2930 | 89.0 | 0.89 | 28.8 | 48.90 | 2.2 | 2.2 | 150 | 0.30 |
YEJ-160L-2 | 18.50 | 2935 | 90.0 | 0.90 | 34.7 | 60.20 | 2.2 | 2.2 | 150 | 0.30 |
YEJ-180M-2 | 22.00 | 2935 | 90.0 | 0.90 | 41.3 | 71.60 | 2.2 | 2.2 | 200 | 0.30 |
YEJ 1500r/min 380V 50Hz:
TYPE | RATED OUTPUT | RATED SPEED | EFFICENCY | POWER FOCTOR | RATED CURRENT | RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TORQUE | STATIC BRAKE TCRQUE | BRAKE TIME |
RATED TORQUE | RATED TORQUE | DC | ||||||||
KW | rpm | η% | COSφ | A | Nm | Ts/Tn | Tmax/Tn | NM | S | |
YEJ-631-4 | 0.12 | 1360 | 57.0 | 0.72 | 0.44 | 0.84 | 2.2 | 2.0 | 3.5 | 0.10 |
YEJ-632-4 | 0.18 | 1360 | 60.0 | 0.73 | 0.62 | 1.26 | 2.2 | 2.0 | 3.5 | 0.10 |
YEJ-711-4 | 0.25 | 1375 | 65.0 | 0.74 | 0.79 | 1.74 | 2.2 | 2.0 | 4.0 | 0.10 |
YEJ-712-4 | 0.37 | 1375 | 67.0 | 0.75 | 1.12 | 2.57 | 2.2 | 2.0 | 4.0 | 0.10 |
YEJ-801-4 | 0.55 | 1405 | 71.0 | 0.75 | 1.57 | 3.74 | 2.2 | 2.4 | 7.5 | 0.10 |
YEJ-802-4 | 0.75 | 1405 | 73.0 | 0.76 | 2.02 | 5.10 | 2.2 | 2.4 | 7.5 | 0.10 |
YEJ-90S-4 | 1.10 | 1445 | 75.0 | 0.77 | 2.82 | 7.27 | 2.2 | 2.3 | 15 | 0.15 |
YEJ-90L-4 | 1.50 | 1445 | 78.0 | 0.79 | 3.7 | 9.91 | 2.2 | 2.3 | 15 | 0.15 |
YEJ-100L1-4 | 2.20 | 1440 | 80.0 | 0.81 | 5.16 | 14.60 | 2.2 | 2.3 | 30 | 0.15 |
YEJ-100L2-4 | 3.00 | 1440 | 82.0 | 0.82 | 6.78 | 19.90 | 2.2 | 2.3 | 30 | 0.15 |
YEJ-112M-4 | 4.00 | 1440 | 84.0 | 0.82 | 8.82 | 26.50 | 2.2 | 2.3 | 40 | 0.15 |
YEJ-132S-4 | 5.50 | 1440 | 85.0 | 0.83 | 11.7 | 36.50 | 2.2 | 2.3 | 80 | 0.15 |
YEJ-132M-4 | 7.50 | 1440 | 87.0 | 0.84 | 15.6 | 49.70 | 2.2 | 2.3 | 80 | 0.15 |
YEJ-160M-4 | 11.00 | 1450 | 88.0 | 0.85 | 21.3 | 72.40 | 2.2 | 2.2 | 150 | 0.30 |
YEJ-160L-4 | 15.00 | 1450 | 89.0 | 0.85 | 30.1 | 98.80 | 2.2 | 2.2 | 150 | 0.30 |
YEJ-180M-4 | 18.50 | 1455 | 90.5 | 0.86 | 36.5 | 121.40 | 2.2 | 2.2 | 150 | 0.30 |
YEJ-180L-4 | 22.00 | 1455 | 91.0 | 0.86 | 43.1 | 144.40 | 2.0 | 2.2 | 200 | 0.30 |
YEJ 1000r/min 380V 50Hz:
TYPE | RATED OUTPUT | RATED SPEED | EFFICENCY | POWER FOCTOR | RATED CURRENT | RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TORQUE | STATIC BRAKE TCRQUE | BRAKE TIME |
RATED TORQUE | RATED TORQUE | DC | ||||||||
KW | rpm | η% | COSφ | A | Nm | Ts/Tn | Tmax/Tn | NM | S | |
YEJ-711-6 | 0.18 | 900 | 56.0 | 0.66 | 0.71 | 19.10 | 1.9 | 2.0 | 4.0 | 0.10 |
YEJ-712-6 | 0.25 | 900 | 59.0 | 0.68 | 0.95 | 2.65 | 1.9 | 2.0 | 4.0 | 0.10 |
YEJ-801-6 | 0.37 | 910 | 62.0 | 0.70 | 1.30 | 3.88 | 1.9 | 2.0 | 7.5 | 0.10 |
YEJ-802-6 | 0.55 | 910 | 65.0 | 0.72 | 1.79 | 5.77 | 1.9 | 2.1 | 7.5 | 0.10 |
YEJ-90S-6 | 0.75 | 930 | 69.0 | 0.72 | 2.26 | 7.70 | 2.1 | 2.1 | 15 | 0.15 |
YEJ-90L-6 | 1.10 | 940 | 72.0 | 0.73 | 3.14 | 11.20 | 2.1 | 2.1 | 15 | 0.15 |
YEJ-100L-6 | 1.50 | 940 | 76.0 | 0.76 | 3.95 | 15.20 | 2.2 | 2.1 | 30 | 0.15 |
YEJ-112M-6 | 2.20 | 96o | 79.0 | 0.76 | 5.57 | 21.90 | 2.2 | 2.1 | 40 | 0.15 |
YEJ-132S-6 | 3.00 | 960 | 81.0 | 0.76 | 7.40 | 29.80 | 2.2 | 2.1 | 80 | 0.15 |
YEJ-132M1-6 | 4.00 | 960 | 82.0 | 0.76 | 9.63 | 39.80 | 2.2 | 2.1 | 80 | 0.15 |
YEJ-132M2-6 | 5.50 | 960 | 84.0 | 0.77 | 12.90 | 54.70 | 2.2 | 2.1 | 150 | 0.30 |
YEJ-160M-6 | 7.50 | 970 | 86.0 | 0.77 | 17.00 | 73.80 | 1.8 | 2.1 | 150 | 0.30 |
YEJ-160L-6 | 11.00 | 970 | 87.5 | 0.78 | 24.30 | 108.30 | 1.9 | 2.1 | 150 | 0.30 |
YEJ-180L-6 | 15.00 | 970 | 89.0 | 0.81 | 31.60 | 147.70 | 2.1 | 2.1 | 200 | 0.30 |
YVP 3000r/min 380V 50Hz:
TYPE | RATED OUTPUT | RATED SPEED | EFFICENCY | POWER FOCTOR | RATED CURRENT | RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TORQUE | FREOUENCY CONVERSION BLOWER | ||
RATED TORQUE | RATED TORQUE | VOLTAGEV | SPEED | ||||||||
KW | rpm | η% | COSφ | A | Nm | Ts/Tn | Tmax/Tn | THREE PHASE | SINGLE PHASE | RPM | |
YVP-631-2 | 0.18 | 2800 | 65.0 | 0.80 | 0.53 | 0.61 | 2.2 | 2.2 | 380 | 220 | 2800 |
YVP-632-2 | 0.25 | 2800 | 68.0 | 0.81 | 0.69 | 0.85 | 2.2 | 2.2 | 380 | 220 | 2800 |
YVP-711-2 | 0.37 | 2830 | 70.0 | 0.81 | 0.99 | 1.25 | 2.2 | 2.2 | 380 | 220 | 2800 |
YVP-712-2 | 0.55 | 2830 | 73.0 | 0.82 | 1.40 | 1.86 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-801-2 | 0.75 | 2840 | 75.0 | 0.83 | 1.83 | 2.52 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-802-2 | 1.10 | 2840 | 77.0 | 0.85 | 2.55 | 3.70 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-90S-2 | 1.50 | 2840 | 79.0 | 0.85 | 3.39 | 5.04 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-90L-2 | 2.20 | 2840 | 81.0 | 0.86 | 4.80 | 7.40 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-100L-2 | 3.00 | 2860 | 83.0 | 0.87 | 6.31 | 10.0 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-112M-2 | 4.00 | 2880 | 84.0 | 0.88 | 8.22 | 13.3 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-132S1-2 | 5.50 | 2910 | 85.0 | 0.88 | 11.2 | 18.0 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-132S2-2 | 7.50 | 2910 | 86.0 | 0.88 | 15.1 | 24.6 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-160M1-2 | 11.0 | 2930 | 88.0 | 0.89 | 21.3 | 35.9 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-160M2-2 | 15.0 | 2930 | 89.0 | 0.89 | 28.8 | 48.9 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-160L-2 | 18.5 | 2935 | 90.0 | 0.90 | 34.7 | 60.2 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-180M-2 | 22.0 | 2935 | 90.0 | 0.90 | 41.3 | 71.6 | 2.0 | 2.3 | 380 | 220 | 2800 |
YVP 1500r/min 380V 50Hz:
TYPE | RATED OUTPUT | RATED SPEED | EFFICENCY | POWER FOCTOR | RATED CURRENT | RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TORQUE | FREOUENCY CONVERSION BLOWER | ||
RATED TORQUE | RATED TORQUE | VOLTAGEV | SPEED | ||||||||
KW | rpm | η% | COSφ | A | Nm | Ts/Tn | Tmax/Tn | THREE PHASE | SINGLE PHASE | RPM | |
YVP-631-4 | 0.12 | 1360 | 57.0 | 0.72 | 0.44 | 0.84 | 2.2 | 2.0 | 380 | 220 | 2800 |
YVP-632-4 | 0.18 | 1360 | 60.0 | 0.73 | 0.62 | 1.26 | 2.2 | 2.0 | 380 | 220 | 2800 |
YVP-711-4 | 0.25 | 1375 | 65.0 | 0.74 | 0.79 | 1.74 | 2.2 | 2.0 | 380 | 220 | 2800 |
YVP-712-4 | 0.37 | 1375 | 67.0 | 0.75 | 1.12 | 2.57 | 2.2 | 2.0 | 380 | 220 | 2800 |
YVP-801-4 | 0.55 | 1405 | 71.0 | 0.75 | 1.57 | 3.74 | 2.2 | 2.4 | 380 | 220 | 2800 |
YVP-802-4 | 0.75 | 1405 | 73.0 | 0.77 | 2.02 | 5.10 | 2.2 | 2.4 | 380 | 220 | 2800 |
YVP-90S-4 | 1.10 | 1445 | 75.0 | 0.79 | 2.82 | 7.27 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-90L-4 | 1.50 | 1445 | 78.0 | 0.79 | 3.70 | 9.91 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-100L1-4 | 2.20 | 1440 | 80.0 | 0.81 | 5.16 | 14.60 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-100L2-4 | 3.00 | 1440 | 82.0 | 0.82 | 6.78 | 19.90 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-112M-4 | 4.00 | 1440 | 84.0 | 0.82 | 8.82 | 26.50 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-132S-4 | 5.50 | 1440 | 85.0 | 0.84 | 11.70 | 36.50 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-132M-4 | 7.50 | 1440 | 87.0 | 0.84 | 15.60 | 49.70 | 2.2 | 2.3 | 380 | 220 | 2800 |
YVP-160M-4 | 11.0 | 1450 | 88.0 | 0.85 | 21.30 | 72.40 | 2.2 | 2.2 | 380 | 220 | 2800 |
YVP-160L-4 | 15.0 | 1450 | 89.0 | 0.85 | 30.10 | 98.80 | 2.2 | 2.2 | 380 | 220 | 2800 |
YVP-180M-4 | 18.5 | 1455 | 90.5 | 0.86 | 36.50 | 121.40 | 2.2 | 2.2 | 380 | 220 | 2800 |
YVP-180L-4 | 22.0 | 1455 | 91.0 | 0.86 | 43.10 | 144.40 | 2.0 | 2.2 | 380 | 220 | 2800 |
YVP 1000r/min 380V 50Hz:
TYPE | RATED OUTPUT | RATED SPEED | EFFICENCY | POWER FOCTOR | RATED CURRENT | RATED TORQUE | LOCKED ROTOR TORQUE | MAXIMUM TORQUE | FREOUENCY CONVERSION BLOWER | ||
RATED TORQUE | RATED TORQUE | VOLTAGEV | SPEED | ||||||||
KW | rpm | η% | COSφ | A | Nm | Ts/Tn | Tmax/Tn | THREE PHASE | SINGLE PHASE | RPM | |
YVP-711-6 | 0.18 | 900 | 58.0 | 0.66 | 0.71 | 1.91 | 1.9 | 2.0 | 380 | 220 | 2800 |
YVP-712-6 | 0.25 | 900 | 59.0 | 0.68 | 0.95 | 2.65 | 1.9 | 2.0 | 380 | 220 | 2800 |
YVP-801-6 | 0.37 | 910 | 62.0 | 0.70 | 1.30 | 3.88 | 1.9 | 2.0 | 380 | 220 | 2800 |
YVP-802-6 | 0.55 | 910 | 65.0 | 0.72 | 1.79 | 5.77 | 1.9 | 2.1 | 380 | 220 | 2800 |
YVP-90S-6 | 0.75 | 930 | 70.0 | 0.72 | 2.26 | 7.70 | 2.1 | 2.1 | 380 | 220 | 2800 |
YVP-90L-6 | 1.10 | 940 | 73.0 | 0.73 | 3.14 | 11.2 | 2.1 | 2.1 | 380 | 220 | 2800 |
YVP-100L-6 | 1.50 | 940 | 76.0 | 0.76 | 3.95 | 15.2 | 2.2 | 2.1 | 380 | 220 | 2800 |
YVP-112M-6 | 2.20 | 960 | 79.0 | 0.76 | 5.57 | 21.9 | 2.2 | 2.1 | 380 | 220 | 2800 |
YVP-132S-6 | 3.00 | 960 | 81.0 | 0.76 | 7.40 | 29.8 | 2.2 | 2.1 | 380 | 220 | 2800 |
YVP-132M1-6 | 4.00 | 960 | 83.0 | 0.76 | 9.63 | 39.8 | 2.2 | 2.1 | 380 | 220 | 2800 |
YVP-132M2-6 | 5.50 | 960 | 84.0 | 0.77 | 12.9 | 54.7 | 2.2 | 2.1 | 380 | 220 | 2800 |
YVP-160M-6 | 7.50 | 970 | 86.0 | 0.78 | 17.0 | 73.8 | 1.8 | 2.1 | 380 | 220 | 2800 |
YVP-160L-6 | 11.0 | 970 | 87.0 | 0.79 | 24.3 | 108.3 | 1.9 | 2.1 | 380 | 220 | 2800 |
YVP-180L-6 | 15.0 | 970 | 89.0 | 0.81 | 31.6 | 147.7 | 2.1 | 2.1 | 380 | 220 | 2800 |
Company Profile
TLWERK, established by the R&D, production and sales team with more than 10 years of technical experience, is a professional trade company.
We focus on the R&D, technology and sales services of induction motors and motor power source systems, especially for the customized development of products according to the specific application requirements of customers.
The products are produced and tested by our professional motor manufacturers and related motor system manufacturers in the partnership.
The developed three-phase asynchronous motor series are: YS/MS, YL/ML, YE3, YE4, YEJ, YVP and permanent magnet motors.
Our products have got a good domestic market and a good fame in more than 30 provinces and cities in China, and now gradually expand the international market.
We have our own experienced R&D team, modern production lines and high-precision testing equipment. The manufacturer strictly implements the ISO9001-2015 quality management system, and all products have been inspected, and have obtained national CCC certification and international CE certification, as well as other relevant international certifications. Our motor products are widely used in different fields such as reducers, hydraulic equipment, lifting equipment, fans, wind power, home appliances, food, clothing, papermaking, packaging, ceramics, printing, chemical industry, animal husbandry machinery, woodworking machinery, agriculture and water conservancy.
Production & Workshop
We adhere to the business philosophy of “Life, based on quality; Trust, based on honesty; Win-win cooperation”, and insists on giving back to all customers with high-quality products and comprehensive services!
Certifications
Packaging & Shipping
FAQ
1.How about your MOQ and lead time?
Both MOQ and lead time depends on specific products. Generally speaking, it cost 10-30 days.
2.Can I get sample?
Yes. We offer sample motor.
3.Is customized service available?
OEM & ODM both are available. Please inform us with output power, speed rpm, output torque, using voltage and application range.
4. What is your payment term?
30% T/T in advance, 70% balance before shipment
30% T/T in advance, 70% balance 30 days after BL date by ocean, 15 days after AWB date by air, after a long-term stable cooperation.
5. What about warranty?
One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.
6.Why us?
* Professional factory for Electric Motor in China
*Safety / Energy Consumption / Superior Life
* Full of export experiences.
* 100% tested before delivery
* A complete set of motor solutions can be provided.
* Perfect performance, low noise, slight vibration, reliable running, good appearance, small volume, light weight and easy maintenance.
* CE/ISO Approved
Before Sale | After Sale | ||
1 | Sample Confirmation | 1 | Comprehensive service with separate after-sale team |
2 | Providing information consulting and technical guidance. | 2 | Satisfied solution while any problem identified. |
3 | Packaging can be customized. | 3 | Exclusive and unique solution provided by professional engineers. |
4 | Reply to your enquiry in 24 working hours. | 4 | New craft, new technology and other related advisory services. |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Industrial, Household Appliances |
---|---|
Operating Speed: | Constant Speed |
Number of Stator: | Three-Phase |
Samples: |
US$ 50/Piece
1 Piece(Min.Order) | Order Sample |
---|
Customization: |
Available
|
|
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Are there innovations or emerging technologies in the field of gear motor design?
Yes, there are several innovations and emerging technologies in the field of gear motor design. These advancements aim to improve the performance, efficiency, compactness, and reliability of gear motors. Here are some notable innovations and emerging technologies in gear motor design:
1. Miniaturization and Compact Design:
Advancements in manufacturing techniques and materials have enabled the miniaturization of gear motors without compromising their performance. Gear motors with compact designs are highly sought after in applications where space is limited, such as robotics, medical devices, and consumer electronics. Innovative approaches like micro-gear motors and integrated motor-gear units are being developed to achieve smaller form factors while maintaining high torque and efficiency.
2. High-Efficiency Gearing:
New gear designs focus on improving efficiency by reducing friction and mechanical losses. Advanced gear manufacturing techniques, such as precision machining and 3D printing, allow for the creation of intricate gear tooth profiles that optimize power transmission and minimize losses. Additionally, the use of high-performance materials, coatings, and lubricants helps reduce friction and wear, improving overall gear motor efficiency.
3. Magnetic Gearing:
Magnetic gearing is an emerging technology that replaces traditional mechanical gears with magnetic fields to transmit torque. It utilizes the interaction of permanent magnets to transfer power, eliminating the need for physical gear meshing. Magnetic gearing offers advantages such as high efficiency, low noise, compactness, and maintenance-free operation. While still being developed and refined, magnetic gearing holds promise for various applications, including gear motors.
4. Integrated Electronics and Controls:
Gear motor designs are incorporating integrated electronics and controls to enhance performance and functionality. Integrated motor drives and controllers simplify system integration, reduce wiring complexity, and allow for advanced control features. These integrated solutions offer precise speed and torque control, intelligent feedback mechanisms, and connectivity options for seamless integration into automation systems and IoT (Internet of Things) platforms.
5. Smart and Condition Monitoring Capabilities:
New gear motor designs incorporate smart features and condition monitoring capabilities to enable predictive maintenance and optimize performance. Integrated sensors and monitoring systems can detect abnormal operating conditions, track performance parameters, and provide real-time feedback for proactive maintenance and troubleshooting. This helps prevent unexpected failures, extend the lifespan of gear motors, and improve overall system reliability.
6. Energy-Efficient Motor Technologies:
Gear motor design is influenced by advancements in energy-efficient motor technologies. Brushless DC (BLDC) motors and synchronous reluctance motors (SynRM) are gaining popularity due to their higher efficiency, better power density, and improved controllability compared to traditional brushed DC and induction motors. These motor technologies, when combined with optimized gear designs, contribute to overall system energy savings and performance improvements.
These are just a few examples of the innovations and emerging technologies in gear motor design. The field is continuously evolving, driven by the need for more efficient, compact, and reliable motion control solutions in various industries. Gear motor manufacturers and researchers are actively exploring new materials, manufacturing techniques, control strategies, and system integration approaches to meet the evolving demands of modern applications.
Are there environmental benefits to using gear motors in certain applications?
Yes, there are several environmental benefits associated with the use of gear motors in certain applications. Gear motors offer advantages that can contribute to increased energy efficiency, reduced resource consumption, and lower environmental impact. Here’s a detailed explanation of the environmental benefits of using gear motors:
1. Energy Efficiency:
Gear motors can improve energy efficiency in various ways:
- Torque Conversion: Gear reduction allows gear motors to deliver higher torque output while operating at lower speeds. This enables the motor to perform tasks that require high torque, such as lifting heavy loads or driving machinery with high inertia, more efficiently. By matching the motor’s power characteristics to the load requirements, gear motors can operate closer to their peak efficiency, minimizing energy waste.
- Controlled Speed: Gear reduction provides finer control over the motor’s rotational speed. This allows for more precise speed regulation, reducing the likelihood of energy overconsumption and optimizing energy usage.
2. Reduced Resource Consumption:
The use of gear motors can lead to reduced resource consumption and environmental impact:
- Smaller Motor Size: Gear reduction allows gear motors to deliver higher torque with smaller, more compact motors. This reduction in motor size translates to reduced material and resource requirements during manufacturing. It also enables the use of smaller and lighter equipment, which can contribute to energy savings during operation and transportation.
- Extended Motor Lifespan: The gear mechanism in gear motors helps reduce the load and stress on the motor itself. By distributing the load more evenly, gear motors can help extend the lifespan of the motor, reducing the need for frequent replacements and the associated resource consumption.
3. Noise Reduction:
Gear motors can contribute to a quieter and more environmentally friendly working environment:
- Noise Dampening: Gear reduction can help reduce the noise generated by the motor. The gear mechanism acts as a noise dampener, absorbing and dispersing vibrations and reducing overall noise emission. This is particularly beneficial in applications where noise reduction is important, such as residential areas, offices, or noise-sensitive environments.
4. Precision and Control:
Gear motors offer enhanced precision and control, which can lead to environmental benefits:
- Precise Positioning: Gear motors, especially stepper motors and servo motors, provide precise positioning capabilities. This accuracy allows for more efficient use of resources, minimizing waste and optimizing the performance of machinery or systems.
- Optimized Control: Gear motors enable precise control over speed, torque, and movement. This control allows for better optimization of processes, reducing energy consumption and minimizing unnecessary wear and tear on equipment.
In summary, using gear motors in certain applications can have significant environmental benefits. Gear motors offer improved energy efficiency, reduced resource consumption, noise reduction, and enhanced precision and control. These advantages contribute to lower energy consumption, reduced environmental impact, and a more sustainable approach to power transmission and control. When selecting motor systems for specific applications, considering the environmental benefits of gear motors can help promote energy efficiency and sustainability.
Can you explain the advantages of using gear motors in various mechanical systems?
Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:
1. Torque Amplification:
One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.
2. Speed Control:
Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.
3. Directional Control:
Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.
4. Efficiency and Power Transmission:
Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.
5. Compact and Space-Saving Design:
Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.
6. Durability and Reliability:
Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.
By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.
editor by CX 2024-04-23