DC 220V 550W 2000rpm Sweeping Device Gear Motor
Principal Knowledge
No-load noise of motor: <65dB, L=100cm
Voltage enduration: AC2500V, 1S
Leaking existing: <5mA
Insulation resistance: >500MΩ 500V
Gear ratio: seven&ten
Functions:
The material of rotor is 40Cr, quench to HRC50-fifty five soon after rough rolling, two occasions difficult chopping, the equipment precision can arrive ISO class6-seven.
The substance of shaft equipment is 20CrMnTi, quench to HRC58-61 following tough rolling, two moments challenging reducing, the equipment precision can get there ISO class6-7.
The content of plate equipment is 40Cr, quench to HRC48-fifty one after tough rolling, grind, the precision can get there ISO class6-7.
|
Mode |
Voltage
V |
Electricity
W |
No-load Parameters | Load Parameters | Motor Excess weight
Kg |
|||
| Pace
r/min |
Present
A |
Velocity
r/min |
Torque mN. m | Present
A |
||||
| ZDSDJ750W-220 | 220/50Hz | 750 | 1490 | Max0.8 | 1410 | 5.one | four.sixty | nine. |
| ZDSDJ750W-a hundred | a hundred/60Hz | 750 | 1790 | Max4.5 | 1720 | 4.2 | nine.85 | nine. |
| ZDSDJ1100W-220 | 220/50Hz | 1100 | 1490 | Max1. | 1410 | 7.5 | 4.80 | ten.five |
Organization Information
FAQ
Q: What’re your primary items?
A: We at the moment generate Brushed Dc Motors, Brushed Dc Equipment Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Higher Precision Planetary Equipment Box etc. You can verify the technical specs for above motors on our site and you can e mail us to advocate needed motors for every your specification too.
Q: How to decide on a appropriate motor?
A:If you have motor photos or drawings to present us, or you have in depth specs like voltage, speed, torque, motor dimensions, working method of the motor, required life span and sound amount and so forth, you should do not wait to enable us know, then we can advocate ideal motor for each your ask for accordingly.
Q: Do you have a CZPT services for your standard motors?
A: Sure, we can customise for every your ask for for the voltage, speed, torque and shaft measurement/condition. If you want further wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it as well.
Q: Do you have an personal design services for motors?
A: Of course, we would like to design and style motors separately for our customers, but it may possibly want some mold establishing value and design and style demand.
Q: What is your direct time?
A: CZPTly talking, our regular regular product will require fifteen-30days, a bit longer for CZPT goods. But we are really flexible on the guide time, it will depend on the particular orders.
Please contact us if you have detailed requests, thank you !
