DC motor is a rotating motor that can convert DC electric powered strength into mechanical vitality (DC motor) or mechanical power into DC electric powered strength (DC generator). It is a motor that can change DC and mechanical power into one particular one more. When it operates as a motor, it is a direct existing motor, which converts electrical strength into mechanical energy when it runs as a generator, it is a direct existing generator, which converts mechanical energy into electrical vitality.
|Merchandise Identify||Z500-3A/220KW/330V/151rpm DC Motor|
|Motor Variety||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
|Composition framework||The composition of DC motor must consist of two parts: stator and rotor. The static element of DC motor is known as stator. The primary function of stator is to produce magnetic area, which is composed of base, main magnetic pole, commutation pole, stop cap, bearing and brush system. Working part is known as rotor, whose main function is to create electromagnetic torque and inductive electromotive force. It is the hub of strength conversion of DC motor. So it is also generally named armature, which is made up of rotor, armature core, armature winding, commutator and fan.|
|Torque range||one.five ~180kNm|
|Safety degree||IP23, IP44|
|Functioning velocity||Constant Velocity /Low Velocity /Adjust Velocity /High Speed Other|
|Primary classification||DC Motor is a equipment that converts mechanical vitality into DC electrical power. It is primarily utilised as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy provide of alternator. Even though in areas where DC electricity is essential, AC energy rectifier is also employed to convert AC into DC electrical power, but from some facets of efficiency, AC rectifier energy offer can not completely change DC generator.|
|Software||DC motors are widely utilised in tape recorders, video clip recorders, movie discs, electrical shavers, hair dryers, digital watches, toys and so on.|
|Servicing technique||Expert motor servicing heart motor upkeep procedure: cleansing stator and rotor – changing carbon brush or other parts – vacuum F strain dipping paint – drying – Calibration equilibrium.
1. Use environment need to be always dry, motor floor should be stored cleanse, air intake need to not be hindered by dust, fibers and other road blocks.
2. When the thermal safety of the motor carries on to run, it must be ascertained regardless of whether the fault will come from the motor or the overload or the placing benefit of the protective system is as well low. Following eliminating the fault, it can be put into operation.
3, ensure that the motor is nicely lubricated throughout procedure. The common motor operates for about 5000 hrs, that is to say, lubricating grease should be extra or changed. When bearing overheating or lubricating deterioration is discovered in operation, the hydraulic pressure must adjust lubricating grease in time. When replacing grease, the outdated grease should be taken out, and the oil groove of bearing and bearing cover ought to be washed with gasoline. Then ZL-three lithium grease ought to be loaded with one/2 (two poles) and two/3 (four poles, 6 poles and eight poles) of the cavity in between the interior and outer rings of the bearing.
4. When the lifestyle of the bearing is above, the vibration and sounds of the motor will boost obviously. When the radial clearance of the bearing reaches the following value, the bearing must be changed.
5, when taking away the motor, it is Ok to remove the rotor from the shaft extension or the non extension conclude. If it is not needed to unload the enthusiast, it is more handy to take out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from being damaged.
6. When changing the windings, the form, measurement, turns and gauges of the authentic windings should be recorded. When these information are dropped, they should be received from the producer and the authentic developed windings need to be modified at will, which often deteriorates 1 or a number of efficiency of the motor or even makes it extremely hard to use them.