Select Page

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1400-16 1730 1400kv 10kv IP20

I. Overview
The massive a few-section synchronous motor for TK series air compressor is a substantial-functionality collection merchandise specially designed and developed by our company for the load of air compressor.
This collection of motors adopts new engineering, new components, new procedures, beautiful substance variety, and advanced producing. It has the traits of little measurement, light-weight weight, lovely look, high efficiency, low sounds, minimal vibration, safe and reliable operation, and practical use and routine maintenance.

two. Implementation expectations
GB755 Rotating Motor Ranking and Performance
Classification of GB/T997 rotary motor framework kind, installation sort and junction box place (IM code)
GB/T1571 A few-phase synchronous motor take a look at strategy
GB/T1993 Rotating Machine Cooling Technique
GB/T4942.one Security course (IP) classification of the all round structure of rotating electrical equipment
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft centre height of 56mm and above
GB/T10069 Rotating Equipment Noise Measurement Strategy and Restrict
JB/T8667.one CZPT Problems of Big A few-section Synchronous Motor Element 1: TK Series
3. Simple specialized parameters
Electricity range: 250~10000KW
Rated voltage: 6000, 10000V
Rated pace: 250, 273, three hundred, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Security level: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling method: IC01, IC37, IC81W
Installation strategy: IM7311, IM5710, IM7312, IM7315
*Can be made according to other parameters in accordance to consumer requirements
4, specialized qualities
4.1 The structural style is realistic, protected and reputable, and the ability to step out of step is sturdy.
four.two The major insulation construction making use of new insulating supplies has higher voltage resistance and extended motor lifestyle.
4.3 The temperature increase margin is large. The motor adopts F-class insulation, and the temperature increase is assessed according to the temperature rise restrict of the B pole insulation.
four.4 The safety device is superior and comprehensive.
four.1.one The stator windings and bearings are outfitted with temperature detection products, which can detect, alarm and excursion.
four.4.2 Shutdown room heater with anti-condensation result.
four.5 Large inertia. Motors with different moments of inertia can be made in accordance to consumer requirements.
Five, framework sort
five.1 The general composition of this series of motors is welded with metal plates for the body, stop cover, and base plate. The motor is an independent cavity, and the slip ring can be designed with different safety stages according to user needs.
5.2 Stator: The stator frame is welded by steel plate. The motor stator outlet is led out by a high-voltage rubber cable. The outlet position can be led out from the reduce component of the foundation or from the principal junction box on the aspect of the motor.
The stator core is superimposed by minimal-loss silicon steel sheets, and the core sections are separated by radial ventilation ducts.
The stator winding is F grade insulation, and the temperature increase is assessed according to B quality to support lengthen the service life. It adopts VPI all round dipping paint remedy, which has substantial electrical efficiency, mechanical power, insulation performance, moisture resistance and thermal security.
five.three The rotor magnetic pole main is manufactured of laminated steel plates, and has various constructions this kind of as magnetic pole screws and T tails. The rotor bracket has air flow holes and is outfitted with a enthusiast, which can nicely control the temperature rise of the rotor.
5.4 Undertake seat type spherical sliding bearing. The bearings are insulated to prevent shaft currents.
Use new lubricating oil and slender-walled bearing alloy tiles, and established electromagnetic centerline indicators.
5.5 According to user needs, the slip ring can be developed as a good stress ventilation structure to boost the basic safety of the motor. The total size of the motor with the good pressure ventilation structure of the slip ring is somewhat improved.
6. Problems of Use
six.one Voltage fluctuation: ±5% (It can run under ±10% underneath the circumstances of seven.3 in GB755)
six.two Frequency fluctuation: ±2%
6.3 The altitude does not exceed 1000m
six.4 The greatest ambient temperature does not exceed +40ºC, and the least is 0ºC.
7, model description
 TK1250-sixteen/2150

Outer diameter of stator punch (Φ2150mm)

Quantity of poles (16 poles)

Rated electrical power (1250KW)
Three-stage synchronous motor for compressor
eight. Buying instructions
eight.1 Just before positioning an purchase, remember to refer to the solution catalog of this collection to explain the needed solution model, specifications and other info. If there is a discrepancy among the specifications and the samples, you should speak to our firm.
eight.two The motor model, rated electrical power, synchronous speed, rated voltage, rated frequency, defense degree, second of inertia, rotation direction, installation sort, and many others. have to be indicated when ordering.
8.3 The sample specialized data sheet only lists the appropriate information of motors with rated voltages of 6KV and 10KV. If consumers want other voltage levels, our organization can also supply relevant complex information when buying.
8.four The technical information and proportions in the sample are only for reference when the person selects the model. The official info will be offered by the organization soon after the agreement or specialized arrangement is signed.
8.5 If there are any other special specifications, make sure you supply the demands and indication the related specialized settlement when ordering.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk1400-16 1730 1400kv 10kv IP20