modest bldc motor 24v 200w servo motor 1500rpm dc brushless motor with encoder for Multi-functional software system
Model:80AS5712-15
1.Solution Attributes:
1)Safety grade:IP65, insulation grade:F
2)Winding overhang construction optimization, to decrease the copper reduction and iron loss minimization, little volume, mild excess weight, reduced temperature rise, substantial efficiency
three)Tremendous substantial coercivity, the highest magnetic power merchandise NdFe35 long lasting magnetic materials, powerful resistance to demagnetization, motor functionality is stable.
4)Minimal noise, minimal vibration, minimal minute of inertia.
5)High torque, quickly dynamic response, broad pace range, sturdy overload potential (four instances)
6)Large Torque to inertia ratio&up to 25000Nm/kgm²
7)Quickly dynamic response *time continual <20ms
eight)Vast pace altering&suggestions up to one thousand:one
9)Steady pace precision up to .5%
ten)Higher overload,2Mn/30s,3.5N.m/10s
eleven)Little volume and mild
12.Silent,the lowest sound is only 45dB(A)
13.Guarded with IP65,Course F insulation
two.Business course:
a.The altitude ought to be in excess of one thousand meters over sea degree
b.Environment temperature:+5ºC~+40ºC
c.The month average tallest relative humidity is ninety%,at the identical the month average cheapest temperature is significantly less than 25
three.Product Parameter:
Product | 80AS5712-fifteen | Volt | 24v |
Electricity | 200w |
Rated Torque |
1.27Nm |
Rated Velocity |
1500rpm |
Rated Current |
9.4A |
Peak Torque |
3.8Nm |
Line Resistance |
.06Ω |
Rotor Continuous |
.28mH |
Torque constant |
.17Nm/A |
Back EMF Constant |
17.3v/kr/min |
Rotor Inertia |
418Kg.mtwo×10-6 |
Mechanical Time Constant |
.56ms |
CZPTal Time Consistent |
.5ms |
Encoder |
2500ppr | Bodyweight | 2.2kg |
4.Associated Merchandise:
Design | Volt | Electrical power | Rated velocity | Rated Existing | Rated Torque | Peak Torque | Weight |
Device | V | W | r/min | A | N.m | N.m | kg |
60AS5711-thirty | 24 | a hundred | 3000 | 5.4 | .318 | .95 | 1.5 |
60AS5712-30 | 24 | 200 | 3000 | 10.4 | .63 | one.89 | one.5 |
80AS5712-fifteen | 24/forty eight | two hundred | 1500 | nine.4/four.seven | 1.27 | 3.8 | 2.two |
80AS5714-fifteen | 24/forty eight | 400 | 1500 | 21.three/10.six | 2.55 | seven.65 | 3.six |
80AS5714-30 | 24/48 | 400 | 3000 | 18.8/9.four | one.27 | three.eight | 2.two |
110AS0405-15 | 24/48 | five hundred | 1500 | 24/14 | 3.1 | 10.8 | 6 |
110AS0408-15 | 24/forty eight | 800 | 1500 | forty four/22 | 5 | seventeen.nine | six.six |
110AS571-15 | 24/forty eight | 1000 | 1500 | 52/28 | six.3 | 22 | 7.eight |
110AS571-15 | forty eight | 1500 | 1500 | 37.five | nine.5 | 28 | ten |
110AS0420-25 | 48 | 2000 | 2500 | 55 | seven.6 | 26 | 10 |
130AS0430-fifteen |
forty eight | 3000 | 1500 | seventy three | 19 | 57 | fourteen |
130AS571-fifteen |
forty eight | 1000 | 1500 | 28 | 6.3 | 22 | 7.eight |
130AS571-15 | 48 | 1500 | 1500 | 37.5 | 9.five | 28 | ten |
five.Drawing:
Application