Integrated DC Servo Motor With Driver Constructed-in
one.Operating voltage: DC enter voltage 15VDC to 50VDC ,advise voltage is 36V
two.The max steady output recent is 10A, the max peak existing is 22A (three times overload ability)
three.Acceptable differential or solitary-ended pulse / route command, have a few control mode of situation, velocity and torqe
four.Making use of FOC magnetic place handle technological innovation and place vector pulse width modulation (SVPWM) closed-loop handle technology
five.The amount of pulses per cycle (subdivision) can be set by the debug computer software or the dial switch location(digital equipment ratio)
6.Have a few varieties of 90w,130w and 180w DC brushless servo motor to decide on.
7.Have defense of overvoltage, undervoltage, overcurrent and tolerance,and so on.
8.Solitary / double pulse mode, the pulse valid edge can be choose.
nine.The max pulse frequency of manage instruction is 500KHz (manufacturing facility default is 200KHz)
10.Pulse, route and enable sign input interface stage is four.five to 28V appropriate
eleven.With serial RS232 / RS485 debugging perform, but need to use our specific serial debugging cable
twelve.Performance: smooth speed, little overshoot ,modest monitoring mistake, minimal warmth of motor and driver
Driver Product And Assortment Xihu (West Lake) Dis.
|Vector Maximum Current||16A||18A||22A|
|Body Length(MM)||106.2 0.five||126.2 0.five||146.2 0.five|
|Operation Voltage||15-50Vdc,36Vdc recommend|
|Overvoltage Protection Voltage||68Vdc±2|
|Control Method||32 bits DSP vector FOC control technology|
|Pulse Limit Frequency||500KHz(factory default 200KHz)|
|Security||Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm|
|Input Signal||Pulse, direction and enable differential / single-ended interface signal,
interface level 4.five-28Vdc compatible, no need external current limiting resistor
|Output Signal||Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
|Electronic Gear Ratio||Default 4000 / rev, through the DIP switch or debug software setting subdivision
|Position Error Control Accuracy||±1 Pulse|
|Speed Control Accuracy||±2 rpm|
|Maximum Acceleration||100 rpm/ms|
Dialing Switch Settings
Subdivision precision (electronic equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the generate employs the internal default micro-stage subdivision, the default internal subdivision of the driver is 400Pulse / rev, and the digital gear ratio can also be established by the debugging application. SW5 set the motor direction,when turnON, the motor turns clockwise (CW),when switch OFF, the motor turns counterclockwise(CCW). SW6 manage method variety, whenON, the motor enters the self-take a look at mode,making one particular CZPT and reverse revolution, has been recurring until finally exit self-take a look at manner, the external manage sign is invalid at self examination mode, whenOFF, the motor exits self-test method,then the external manage signal is valid.
Mechanical Composition Dimension
|Driver mode||Motor body length(mm)||Driver thickness(mm)||Integrated motor driver length(mm)|
Observe : All previously mentioned is usually employed, and we can customise in accordance to your request or choose the suitable product for you, you should notify us subsequent parameters: existing, voltage, keeping torque, body length,the application spot.
Suitable for all sorts of tiny and medium-sized automation equipments and devices. This kind of as: laser products, health care products, 3D printer, tiny and medium-sized engraving machine, electronic processing gear, computerized crawling products, special CNC equipment resource, packaging equipment and robotic. It is particularly valuable for consumers who anticipate lower noise and higher pace apps.
Packaging and shipping
one.Outer packing: CZPT export carton with needed transport marks
two.Inner packing: Water-resistant packing with shock absorbing EPE and cardboard surrounded
3.As for each the customers requirements
1.Working time : eight:00 a.m – ten:00 p.m .Any inquiries, make sure you explain to us freely, we will be reply you asap.
two.Lead time : For samples, 2 to 5 times will be Alright. For mass creation, the lead time rely on the quantities you require.
three.Warrantity period : 18 months and Life-prolonged maintenance support for the merchandise.
four.We settle for merchandise customize.
Q1: How to choose the suitable stepper or servo motor?
A1: There are serveral crucial things: dimensions, duration, keeping torque, voltage, current etc.Soon after confirm them and advised us, we can select the suited one particular for you.
Q2: Any other techniques to finalize the product?
A2: Confident, you can ship us the design you are using, we can help you locate the suitable a single.
Q3:How to promise the High quality of CZPT Components?
A3: We have the integrated technique for industrial elements quality manage. We have IQC (incoming quality control), IPQCS (in method high quality handle section), FQC (closing quality management) and OQC (out-going quality handle) to control every procedure of industrial elements prodution.
This autumn:What is the Edge of Your Parts for Sector Items?
A4:one.The benefit of our items is the competitive prices, quick supply and substantial quality. Our
staff are responsible-oriented, helpful-oriented,and diligent-oriented. Our goods are highlighted by strict tolerance, clean complete and long provider time.
two.Just before we send out the products,we verify them a lot more than 3 moments.