DC Motor Z630-6A 1168kw 660V 295 to Large DC Motor

DC Motor Z630-6A 1168kw 660V 295 to Large DC Motor

Product Description:
DC motor is a rotating motor that can transform DC electrical vitality into mechanical vitality (DC motor) or mechanical vitality into DC electric power (DC generator). It is a motor that can convert DC and mechanical energy into 1 an additional. When it runs as a motor, it is a immediate present motor, which converts electrical energy into mechanical vitality when it operates as a generator, it is a direct current generator, which converts mechanical energy into electrical vitality.

Merchandise Title DC Motor Z630-6A 1168KW 660V 295 to big DC Motor
Motor Sort DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition composition The framework of DC motor should consist of two areas: stator and rotor. The static component of DC motor is known as stator. The major operate of stator is to create magnetic field, which is composed of base, primary magnetic pole, commutation pole, conclude cap, bearing and brush gadget. Managing portion is referred to as rotor, whose major purpose is to generate electromagnetic torque and inductive electromotive power. It is the hub of strength conversion of DC motor. So it is also commonly called armature, which is made up of rotor, armature core, armature winding, commutator and supporter.
Design Z Sort
Seat number Z315-Z1000
electrical power 60~2800kW
Voltage 220~1000V
Torque range 1.5 ~180kNm
Defense stage IP23, IP44
Cooling manner IC06,IC17,IC37,IC81W
Running pace  Constant Velocity /Reduced Speed /Modify Velocity /Higher Speed Other 
Main classification DC Motor is a equipment that converts mechanical strength into DC energy. It is mainly utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy supply of alternator. Although in spots in which DC power is needed, AC energy rectifier is also utilised to transform AC into DC electrical power, but from some elements of overall performance, AC rectifier electrical power source can not fully replace DC generator.  
Software DC motors are broadly employed in tape recorders, movie recorders, movie discs, electric shavers, hair dryers, electronic watches, toys and so on.
Servicing approach Expert motor maintenance center motor servicing method: cleansing stator and rotor – changing carbon brush or other components – vacuum F stress dipping paint – drying – Calibration harmony.
1. Use environment ought to be usually dry, motor floor must be stored clean, air intake must not be hindered by dust, fibers and other obstructions.
two. When the thermal security of the motor proceeds to work, it should be ascertained whether the fault arrives from the motor or the overload or the setting price of the protecting system is as well reduced. After removing the fault, it can be put into operation.
3, make certain that the motor is properly lubricated throughout procedure. The general motor runs for about 5000 hrs, that is to say, lubricating grease need to be included or changed. When bearing overheating or lubricating deterioration is discovered in procedure, the hydraulic force need to alter lubricating grease in time. When replacing grease, the previous grease should be eliminated, and the oil groove of bearing and bearing include need to be washed with gasoline. Then ZL-three lithium grease need to be filled with 1/two (2 poles) and two/3 (four poles, six poles and eight poles) of the cavity between the internal and outer rings of the bearing.
four. When the daily life of the bearing is in excess of, the vibration and sounds of the motor will improve naturally. When the radial clearance of the bearing reaches the following worth, the bearing must be replaced.
five, when taking away the motor, it is Ok to get rid of the rotor from the shaft extension or the non extension stop. If it is not essential to unload the supporter, it is a lot more practical to get out the rotor from the non-axle extension conclude. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from being broken.
6. When replacing the windings, the sort, size, turns and gauges of the original windings have to be recorded. When these knowledge are lost, they should be obtained from the manufacturer and the unique designed windings ought to be changed at will, which usually deteriorates 1 or numerous efficiency of the motor or even tends to make it extremely hard to use them.



DC Motor Z630-6A 1168kw 660V 295 to Large DC Motor


Recent Posts


As one of leading gear-motors manufacturers, suppliers and exporters of mechanical products, We offer gear-motors and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.