China 14-16 Tons Forklift Hydraulic Transmission Gearbox for 14-16 Tons Internal Combustion Counterbalanced Forklift gearbox drive shaft

Solution Description

Product Description

Product Design:QTQX150T Collection
Ideal for 14-sixteen tons Inside combustion motor balance forklift.
Manufacturer:TCM,HELI,DOOSAN,HANGCHA,TAILIF,…..
Charactics:
1)Very good T/C self-adaption for severe street issue and mutational load.
2)With 3 forward shifts and 3 backward shift, the transmission has a greater transmission capability and far more secure operation.
three)Added PTO(oil pump) output, the transmission can be adapted to much more engines.
four)With Proportional Solenoid Valve to make certain the clutch to combine efficiently.
five)With Eu to shift immediately.
six)With cartridge solenoid valve.
seven)With rotary situation sensing inching procedure.
8)Aluminum alloy cast impeller of torque converter.
nine)Internal oil channel.

Solution Parameters

Transmission Design QTQX150T collection
Matched Forklift weight(ton) fourteen – sixteen
Match Engine Rated Electricity(kw) 110~a hundred and forty
Match Engine Rotating Speed(r/min) 2000~2400
Transmission Ratio Ahead I  (F1) five.2428
Ahead II  (F2) two.8294
Forward III  (F3) 1.1602
Backward I  (R1) five.2428
Backward II  (R2) 2.8294
Backward III  (R3) 1.1602
T/C Design YBQM2323 Sequence
Efficient Diameter(mm) 323
Zero Velocity Torque Coefficient two.9±0.21
Best Performance >0.825
Zero Speed Pump Impeller Nominal Second(N.m) 117±6
Prime Effectiveness operating problem Pump Impeller Nominal Moment(N.m) 100±6
The Operating Oil No. 6 , No. 8  Hydraulic Transmission Oil
Operating Oil Tempreture ºC 70 ~ ninety five
Max Doing work Oil Tempreture ºC one hundred twenty (no far more than 5 min)
Internet Excess weight Kgs 420
Match Engine WEICHAI 6175

The company is specialised in the manufacturing of engine gears, gears of transmission, and gears employed for numerous design equipment and cars. The business owns a variety of varieties of large-quality, precision and innovative machining tools (photos) which can economically and proficiently machine and make transmission components like spur gear, helical gear, multi-url gear, internal gear, tiny-taper enamel, crowned tooth, sharp and slender tooth, worm equipment and chain gear.
Equipment machining assortment:
1.Maximum modulus: 8
two.Greatest outer diameter: φ500
three.Accuracy grade:4 Grade GB/T 10095-2008

Our Advantages

Company Profile

HangZhou Tsingleader Market Co., Ltd. is located in the gorgeous HangZhou town. We focus in the generation of trailer areas, axle and transmission of engineering machinery and particular engineering and agricultural equipment.
Over the previous several years, Tsingleader Business has invested 4 production plants in China. Adhering to the principle of “good quality assurance, abiding by the contract, reciprocity, mutual advantage and 1st-course companies”, we have gained the have faith in from our clientele the two at home and abroad.
Our once-a-year income sum reaches USD 5 million and our merchandise have been exported to North and South America, Europe ,Africa,South Asia and the Middle East.
We sincerely hope to grow to be your earnest business partner and your make contact with will be warmly welcomed.

US $700-2,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: All Lifecycle
Warranty: 1 Year
Material: Carbon Steel
Surface Treatment: Baking Paint
Customized: Customized
Standard: Standard

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Transmission Model QTQX150T series
Matched Forklift weight(ton) 14 – 16
Match Engine Rated Power(kw) 110~140
Match Engine Rotating Speed(r/min) 2000~2400
Transmission Ratio Forward I  (F1) 5.2428
Forward II  (F2) 2.8294
Forward III  (F3) 1.1602
Backward I  (R1) 5.2428
Backward II  (R2) 2.8294
Backward III  (R3) 1.1602
T/C Model YBQM2323 Series
Effective Diameter(mm) 323
Zero Speed Torque Coefficient 2.9±0.21
Top Efficiency >0.825
Zero Speed Pump Impeller Nominal Moment(N.m) 117±6
Top Efficiency working condition Pump Impeller Nominal Moment(N.m) 100±6
The Working Oil No. 6 , No. 8  Hydraulic Transmission Oil
Working Oil Tempreture ºC 70 ~ 95
Max Working Oil Tempreture ºC 120 (no more than 5 min)
Net Weight Kgs 420
Match Engine WEICHAI 6175
US $700-2,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: All Lifecycle
Warranty: 1 Year
Material: Carbon Steel
Surface Treatment: Baking Paint
Customized: Customized
Standard: Standard

###

Samples:
US$ 1000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Transmission Model QTQX150T series
Matched Forklift weight(ton) 14 – 16
Match Engine Rated Power(kw) 110~140
Match Engine Rotating Speed(r/min) 2000~2400
Transmission Ratio Forward I  (F1) 5.2428
Forward II  (F2) 2.8294
Forward III  (F3) 1.1602
Backward I  (R1) 5.2428
Backward II  (R2) 2.8294
Backward III  (R3) 1.1602
T/C Model YBQM2323 Series
Effective Diameter(mm) 323
Zero Speed Torque Coefficient 2.9±0.21
Top Efficiency >0.825
Zero Speed Pump Impeller Nominal Moment(N.m) 117±6
Top Efficiency working condition Pump Impeller Nominal Moment(N.m) 100±6
The Working Oil No. 6 , No. 8  Hydraulic Transmission Oil
Working Oil Tempreture ºC 70 ~ 95
Max Working Oil Tempreture ºC 120 (no more than 5 min)
Net Weight Kgs 420
Match Engine WEICHAI 6175

Types of Gearboxes Used in Wind Turbines

Many manufacturers of wind turbines have chosen different solutions for the drive train of the turbines. Most prefer gearboxes because of their durability. These have several design features that make them well suited to shocks, stresses and wear. Regardless of the type of gearbox used, continuous maintenance and monitoring can extend the lifespan of these machines. Performing these tasks regularly can help detect and resolve any problems before they become serious. Here are some of the problems associated with gearboxes.
gearbox

Coaxial helical gearbox

The R series helical inline gearbox is a high-quality speed reducer for heavy-duty industrial applications. These units are designed with increased power density in mind and are equipped with various cooling options. High-grade seals and lubricants help to increase efficiency and minimize thermal loading. They are ATEX-compliant. Their reversible modules are an excellent choice for high-speed applications, such as compressors, compressor blowers, and pumps.
The normal module set of helical gearbox is manufactured using the same tooth-cutting techniques as spur gears. This allows the production of higher-quality, more economical, and more compact helical gears. Although the performance of helical gears is lower than spur gears, they are durable and capable of transferring motion and power between two shafts. And because they are able to handle a much greater load, they are preferred for heavy-duty applications.
The main tooth form of a helical gearbox presents fixed velocity ratios, even if the center gap is not completely set. This requirement is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to a set of paper spur gears, with the exception that the sections must stagger in opposite directions. There are two kinds of helical gears for parallel shafts: left-handed and right-handed.
The Industrial Gearbox market is segmented based on product type, application, and geography. The report analyzes the competitive scenario by segmenting the market by region, company, and type. Using this information, it estimates market size, revenue, and consumption. The report also features key information about COVID-19 and its impact on the overall industry. And it also provides a competitive landscape with industry-leading players.
Industrial gearboxes are integrated with devices and make automation processes more efficient and reliable. Increasing labor costs, shortage of skilled labor, and the ageing workforce are driving the demand for automation technologies. The industry requires newer and more advanced models and technologies to compete in the global market. You can use Coaxial helical gearbox in a variety of applications. Its benefits are endless. If you are looking for a reliable, high-performance industrial gearbox, CZPT can help you find it.
gearbox

Worm reduction gearbox

As a general rule, larger center distance worm reduction gearboxes are more efficient than smaller ones. Worm gearboxes with 2.6-in. center distances start to lose efficiency as their ratios increase. Larger center distances tend to have higher efficiency than smaller ones. However, this difference may not always be enough to justify the higher investment. Worm gear reducers typically cost less than equivalent helical units.
The use of aluminum for worm reduction gearboxes is a popular choice for those involved in the manufacturing of Packaging Equipment. In addition to being lightweight, aluminum worm reduction gearboxes have high strength and rigidity. Manufacturers recommend this choice because of its high rigidity and durability. While purchasing aluminum worm reduction gearboxes, keep in mind that they are more expensive than steel versions. However, they have a longer lifespan and are highly resistant to wear.
The worm’s helix angle is larger than a helical gear, which allows a much higher gear ratio. In addition, the worm’s body is usually longer in the axial direction than helical gears. Worm reduction gears are often left-handed, and British or Indian standards are usually followed. The worm wheel is made of hardened alloy steel PB2-C, while the gearbox case is made of hardened alloy steel FG 220 or FG 250res.
The worms in a sacrificial system are relatively safe from wear. Instead, the softer wheel is the cause of most wear and tear. The oil analysis report for a sacrificial system shows low iron levels and high copper concentrations. However, if a worm reduction gearbox has a bad reputation, you should consider purchasing a new one. If the worm gears are in good condition, the gearbox is still a viable option for a new or replacement vehicle.
The advantages of a worm reduction gearbox are numerous. The worm gearbox is widely used in industrial settings, where it provides torque and speed reduction to move products. Worm gearboxes are also commonly used in automatic security gates, which will not run in reverse. Most security gates use two separate worm drives to keep the gate in the closed position. There are also many other uses for worm reducers. You can learn more about the benefits of worm gearboxes by reading below.

Stainless steel gearbox

Stainless steel gearboxes offer a number of advantages over standard gearboxes. They match the existing stainless motor design and cost 50 percent more on average. They have stainless output shafts and housings as well as corrosion resistant hardware and a food grade lubricant. Stainless steel gearboxes feature IP 65 sealing, Viton shaft seals at the input and output shafts, and a Buna o-ring between the housings. Stainless steel gearboxes also eliminate flat surfaces and allow for a cylindrical design.
Stainless steel gearboxes are more durable than traditional cast iron or epoxy-painted gearboxes. These gearboxes can withstand repeated washdown operations without damage. They also do not collect particles or bacteria. And because stainless steel does not corrode, stainless steel gearboxes can withstand harsh environments, such as oily or greasy environments. Because stainless steel gearboxes are corrosion-resistant, they require little maintenance. They are also easier to clean and maintain, resulting in fewer replacements and a longer life span for your gearbox.
Stainless steel gearboxes are a great choice for food and other industries that require high hygiene standards. In addition to its durability, stainless steel gearboxes are ideal for applications in environments that require high levels of humidity and water. They are also life-lubricated, and they can be supplied with food-grade oils or water. The CZPT Gears stainless gearbox is a versatile option for a variety of applications.
Stainless steel gearboxes offer superior corrosion protection and can withstand harsh environments. The stainless steel cover, housing, and external hardware ensure superior corrosion protection. If you have questions about the varying benefits of stainless steel gearboxes, contact a CZPT Gear sales representative to learn more about your options. And if you are not sure which type is right for your needs, contact a CZPT Gear sales representative to find the perfect solution for your business.
gearbox

1 speed gearbox

Volkswagen Group Components manufactures the one speed gearbox. The gearbox has a high-performance electric drive motor that produces 310 Nm of torque over a wide speed range. Designed for maximum range, this gearbox uses a single gear for all driving situations. It is extremely quiet, too, and requires precision manufacturing. Volkswagen has also made it available in a reverse-gear configuration with power electronics. Volkswagen’s ID.3 EV’s e-drive motor is a perfect example of this.
The first part of the transmission corresponds to the even and odd gears, while the second part has the straighter gears. A single gear set can change between both modes. An intermediate gear set is also possible. A lastshelf gear can be formed by hydraulically betigte Lamellenkupplungen. Both types of gears can be exchanged between partial transmissions. The invention may furthermore include a transmission with the same gear ratios as the first part of the transmission.
Another variation of the one speed gearbox is the CVT. This type of gearbox has only one drive unit, which means it does not require a clutch or brake. Its power is derived from the torque generated by the Internal Combustion Engine at a particular speed. The engine cannot sustain such high torque levels above 5500 RPM, which will reduce the MPG. Also, raising the RPM will reduce the acceleration, and in severe cases may lead to an engine crash.
As the number of applications for a 1 speed gearbox increases, its design and functionality will continue to evolve. Bosch Rexroth has developed its eGFZ gearbox based on customer feedback. They are currently working on various pilot projects and hope to put it into production in the next few years. However, if you want to buy a 1 speed gearbox now, consider the benefits of a first-rate design.

China 14-16 Tons Forklift Hydraulic Transmission Gearbox for 14-16 Tons Internal Combustion Counterbalanced Forklift     gearbox drive shaft	China 14-16 Tons Forklift Hydraulic Transmission Gearbox for 14-16 Tons Internal Combustion Counterbalanced Forklift     gearbox drive shaft
editor by czh 2023-02-06

Recent Posts

gear-motors

As one of leading gear-motors manufacturers, suppliers and exporters of mechanical products, We offer gear-motors and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.