DC motor is a rotating motor that can convert DC electric powered power into mechanical energy (DC motor) or mechanical strength into DC electric powered power (DC generator). It is a motor that can convert DC and mechanical strength into a single one more. When it runs as a motor, it is a immediate recent motor, which converts electrical energy into mechanical energy when it runs as a generator, it is a immediate present generator, which converts mechanical energy into electrical power.
|Solution Title||220V 240V 360V 480V 720V Brushless permanent magnet DC Motor|
|Motor Variety||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
|Composition framework||The structure of DC motor should consist of two parts: stator and rotor. The static component of DC motor is called stator. The major purpose of stator is to create magnetic subject, which is composed of base, main magnetic pole, commutation pole, stop cap, bearing and brush device. Running element is called rotor, whose main function is to make electromagnetic torque and inductive electromotive power. It is the hub of strength conversion of DC motor. So it is also generally called armature, which consists of rotor, armature main, armature winding, commutator and admirer.|
|Torque range||one.5 ~180kNm|
|Defense level||IP23, IP44|
|Running velocity||Constant Velocity /Reduced Speed /Adjust Speed /Substantial Speed Other|
|Main classification||DC Motor is a equipment that converts mechanical vitality into DC electricity. It is largely employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation power source of alternator. Even though in places in which DC electrical power is necessary, AC energy rectifier is also employed to convert AC into DC electrical power, but from some facets of performance, AC rectifier energy offer can not fully change DC generator.|
|Software||DC motors are broadly used in tape recorders, video recorders, video clip discs, electric powered shavers, hair dryers, electronic watches, toys and so on.|
|Maintenance technique||Skilled motor servicing middle motor maintenance process: cleansing stator and rotor – changing carbon brush or other parts – vacuum F strain dipping paint – drying – Calibration harmony.
one. Use setting ought to be usually dry, motor floor must be held cleanse, air intake must not be hindered by dust, fibers and other obstacles.
two. When the thermal safety of the motor carries on to run, it need to be ascertained whether or not the fault comes from the motor or the overload or the placing price of the protective system is as well lower. After eliminating the fault, it can be set into procedure.
3, make certain that the motor is well lubricated during operation. The standard motor operates for about 5000 hrs, that is to say, lubricating grease ought to be included or replaced. When bearing overheating or lubricating deterioration is identified in operation, the hydraulic strain should change lubricating grease in time. When replacing grease, the aged grease ought to be eliminated, and the oil groove of bearing and bearing include ought to be washed with gasoline. Then ZL-3 lithium grease need to be crammed with one/two (2 poles) and 2/3 (4 poles, 6 poles and eight poles) of the cavity among the internal and outer rings of the bearing.
4. When the lifestyle of the bearing is more than, the vibration and sound of the motor will boost obviously. When the radial clearance of the bearing reaches the subsequent benefit, the bearing need to be changed.
five, when taking away the motor, it is Alright to remove the rotor from the shaft extension or the non extension conclude. If it is not required to unload the fan, it is far more convenient to get out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation should be prevented from becoming ruined.
6. When replacing the windings, the type, measurement, turns and gauges of the unique windings should be recorded. When these info are lost, they should be acquired from the maker and the authentic created windings ought to be modified at will, which often deteriorates 1 or several functionality of the motor or even tends to make it extremely hard to use them.